How to write a Haskell program
A guide to the best practice for creating a new Haskell project or program.
- 1 Recommended tools
- 2 Structure of a simple project
- 2.1 Create a directory
- 2.2 Write some Haskell source
- 2.3 Stick it in darcs
- 2.4 Add a build system
- 2.5 Build your project
- 2.6 Run it
- 2.7 Build some haddock documentation
- 2.8 Add some automated testing: QuickCheck
- 2.9 Running the test suite from darcs
- 2.10 Tag the stable version, create a tarball, and sell it!
- 2.11 Summary
- 3 Libraries
- 4 Automation
- 5 Licenses
- 6 Releases
- 7 Hosting
- 8 Web page
- 9 Program structure
- 10 Publicity
Almost all new Haskell projects use the following tools. Each is intrinsically useful, but using a set of common tools also benefits everyone by increasing productivity, and you're more likely to get patches.
Use Darcs unless you have a specific reason not to. It's much more powerful than most competing systems (and it's written in Haskell).
For libraries, use Haddock. We recommend using the latest version of haddock (currently 0.8).
To get started, try Introduction to QuickCheck. For a slightly more advanced introduction, Simple Unit Testing in Haskell is a blog article about creating a testing framework for QuickCheck using some Template Haskell.
Structure of a simple project
The basic structure of a new Haskell project can be adopted from HNop, the minimal Haskell project. It consists of the following files, for the mythical project "haq".
- Haq.hs -- the main haskell source file
- haq.cabal -- the cabal build description
- Setup.hs -- build script itself
- _darcs -- revision control
- README -- info
- LICENSE -- license
You can of course elaborate on this, with subdirectories and multiple modules.
Here is a transcript on how you'd create a minimal darcs and cabalised Haskell project, for the cool new Haskell program "haq", build it, install it and release.
The new tool 'mkcabal' automates all this for you, but its important to understand all the parts first.
We will now walk through the creation of the infrastructure for a simple Haskell executable. Advice for libraries follows after.
Create a directory
Create somewhere for the source:
$ mkdir haq $ cd haq
Write some Haskell source
Write your program:
$ cat > Haq.hs -- -- Copyright (c) 2006 Don Stewart - http://www.cse.unsw.edu.au/~dons -- GPL version 2 or later (see http://www.gnu.org/copyleft/gpl.html) -- import System.Environment -- | 'main' runs the main program main :: IO () main = getArgs >>= print . haqify . head haqify s = "Haq! " ++ s
Stick it in darcs
Place the source under revision control:
$ darcs init $ darcs add Haq.hs $ darcs record addfile ./Haq.hs Shall I record this change? (1/?) [ynWsfqadjkc], or ? for help: y hunk ./Haq.hs 1 +-- +-- Copyright (c) 2006 Don Stewart - http://www.cse.unsw.edu.au/~dons +-- GPL version 2 or later (see http://www.gnu.org/copyleft/gpl.html) +-- +import System.Environment + +-- | 'main' runs the main program +main :: IO () +main = getArgs >>= print . haqify . head + +haqify s = "Haq! " ++ s Shall I record this change? (2/?) [ynWsfqadjkc], or ? for help: y What is the patch name? Import haq source Do you want to add a long comment? [yn]n Finished recording patch 'Import haq source'
And we can see that darcs is now running the show:
$ ls Haq.hs _darcs
Add a build system
Create a .cabal file describing how to build your project:
$ cat > haq.cabal Name: haq Version: 0.0 Description: Super cool mega lambdas License: GPL License-file: LICENSE Author: Don Stewart Maintainer: firstname.lastname@example.org Build-Depends: base Executable: haq Main-is: Haq.hs ghc-options: -O
(If your package uses other packages, e.g. haskell98, you'll need to add them to the Build-Depends: field.) Add a Setup.lhs that will actually do the building:
$ cat > Setup.lhs #! /usr/bin/env runhaskell > import Distribution.Simple > main = defaultMain
Cabal allows either Setup.hs or Setup.lhs, but we recommend writing the setup file this way so that it can be executed directly by Unix shells.
Record your changes:
$ darcs add haq.cabal Setup.lhs $ darcs record --all What is the patch name? Add a build system Do you want to add a long comment? [yn]n Finished recording patch 'Add a build system'
Build your project
Now build it!
$ runhaskell Setup.lhs configure --prefix=$HOME $ runhaskell Setup.lhs build $ runhaskell Setup.lhs install
And now you can run your cool project:
$ haq me "Haq! me"
You can also run it in-place, avoiding the install phase:
$ dist/build/haq/haq you "Haq! you"
Build some haddock documentation
Generate some API documentation into dist/doc/*
$ runhaskell Setup.lhs haddock
which generates files in dist/doc/ including:
$ w3m -dump dist/doc/html/haq/Main.html haq Contents Index Main Synopsis main :: IO () Documentation main :: IO () main runs the main program Produced by Haddock version 0.7
Add some automated testing: QuickCheck
We'll use QuickCheck to specify a simple property of our Haq.hs code. Create a tests module, Tests.hs, with some QuickCheck boilerplate:
$ cat > Tests.hs import Char import List import Test.QuickCheck import Text.Printf main = mapM_ (\(s,a) -> printf "%-25s: " s >> a) tests instance Arbitrary Char where arbitrary = choose ('\0', '\128') coarbitrary c = variant (ord c `rem` 4)
Now let's write a simple property:
$ cat >> Tests.hs -- reversing twice a finite list, is the same as identity prop_reversereverse s = (reverse . reverse) s == id s where _ = s :: [Int] -- and add this to the tests list tests = [("reverse.reverse/id", test prop_reversereverse)]
We can now run this test, and have QuickCheck generate the test data:
$ runhaskell Tests.hs reverse.reverse/id : OK, passed 100 tests.
Let's add a test for the 'haqify' function:
-- Dropping the "Haq! " string is the same as identity prop_haq s = drop (length "Haq! ") (haqify s) == id s where haqify s = "Haq! " ++ s tests = [("reverse.reverse/id", test prop_reversereverse) ,("drop.haq/id", test prop_haq)]
and let's test that:
$ runhaskell Tests.hs reverse.reverse/id : OK, passed 100 tests. drop.haq/id : OK, passed 100 tests.
Running the test suite from darcs
We can arrange for darcs to run the test suite on every commit:
$ darcs setpref test "runhaskell Tests.hs" Changing value of test from '' to 'runhaskell Tests.hs'
will run the full set of QuickChecks. (If your test requires it you may need to ensure other things are built too eg: darcs setpref test "alex Tokens.x;happy Grammar.y;runhaskell Tests.hs").
Let's commit a new patch:
$ darcs add Tests.hs $ darcs record --all What is the patch name? Add testsuite Do you want to add a long comment? [yn]n Running test... reverse.reverse/id : OK, passed 100 tests. drop.haq/id : OK, passed 100 tests. Test ran successfully. Looks like a good patch. Finished recording patch 'Add testsuite'
Excellent, now patches must pass the test suite before they can be committed.
Tag the stable version, create a tarball, and sell it!
Tag the stable version:
$ darcs tag What is the version name? 0.0 Finished tagging patch 'TAG 0.0'
Tarballs via Cabal
Since the code is cabalised, we can create a tarball with Cabal directly:
$ runhaskell Setup.lhs sdist Building source dist for haq-0.0... Source tarball created: dist/haq-0.0.tar.gz
This has the advantage that Cabal will do a bit more checking, and ensure that the tarball has the structure expected by HackageDB. It packages up the files needed to build the project; to include other files (such as Test.hs in the above example), we need to add:
to the .cabal file to have everything included.
Tarballs via darcs
Alternatively, you can use darcs:
$ darcs dist -d haq-0.0 Created dist as haq-0.0.tar.gz
And you're all set up!
The following files were created:
$ ls Haq.hs Tests.hs dist haq.cabal Setup.lhs _darcs haq-0.0.tar.gz
The process for creating a Haskell library is almost identical. The differences are as follows, for the hypothetical "ltree" library:
The source should live under a directory path that fits into the existing module layout guide. So we would create the following directory structure, for the module Data.LTree:
$ mkdir Data $ cat > Data/LTree.hs module Data.LTree where
So our Data.LTree module lives in Data/LTree.hs
The Cabal file
Cabal files for libraries list the publically visible modules, and have no executable section:
$ cat ltree.cabal Name: ltree Version: 0.1 Description: Lambda tree implementation License: BSD3 License-file: LICENSE Author: Don Stewart Maintainer: email@example.com Build-Depends: base Exposed-modules: Data.LTree ghc-options: -Wall -O
We can thus build our library:
$ runhaskell Setup.lhs configure --prefix=$HOME $ runhaskell Setup.lhs build Preprocessing library ltree-0.1... Building ltree-0.1... [1 of 1] Compiling Data.LTree ( Data/LTree.hs, dist/build/Data/LTree.o ) /usr/bin/ar: creating dist/build/libHSltree-0.1.a
and our library has been created as a object archive. Now install it:
$ runhaskell Setup.lhs install Installing: /home/dons/lib/ltree-0.1/ghc-6.6 & /home/dons/bin ltree-0.1... Registering ltree-0.1... Reading package info from ".installed-pkg-config" ... done. Saving old package config file... done. Writing new package config file... done.
And we're done! You can use your new library from, for example, ghci:
$ ghci -package ltree Prelude> :m + Data.LTree Prelude Data.LTree>
The new library is in scope, and ready to go.
More complex build systems
For larger projects it is useful to have source trees stored in subdirectories. This can be done simply by creating a directory, for example, "src", into which you will put your src tree.
To have Cabal find this code, you add the following line to your Cabal file:
Cabal can set up to also run configure scripts, along with a range of other features. For more information consult the Cabal documentation.
A tool to automatically populate a new cabal project is available (beta!):
$ mkcabal Project name: haq What license ["GPL","LGPL","BSD3","BSD4","PublicDomain","AllRightsReserved"] ["BSD3"]: What kind of project [Executable,Library] [Executable]: Is this your name? - "Don Stewart " [Y/n]: Is this your email address? - "<firstname.lastname@example.org>" [Y/n]: Created Setup.lhs and haq.cabal $ ls Haq.hs LICENSE Setup.lhs _darcs dist haq.cabal
which will fill out some stub Cabal files for the project 'haq'.
To create an entirely new project tree:
$ mkcabal --init-project Project name: haq What license ["GPL","LGPL","BSD3","BSD4","PublicDomain","AllRightsReserved"] ["BSD3"]: What kind of project [Executable,Library] [Executable]: Is this your name? - "Don Stewart " [Y/n]: Is this your email address? - "<email@example.com>" [Y/n]: Created new project directory: haq $ cd haq $ ls Haq.hs LICENSE README Setup.lhs haq.cabal
Code for the common base library package must be BSD licensed. Otherwise, it is entirely up to you as the author. Choose a licence (inspired by this). Check the licences of things you use, both other Haskell packages and C libraries, since these may impose conditions you must follow. Use the same licence as related projects, where possible. The Haskell community is split into 2 camps, roughly, those who release everything under BSD, and (L)GPLers. Some Haskellers recommend avoiding LGPL, due to cross module optimisation issues. Like many licensing questions, this advice is controversial. Several Haskell projects (wxHaskell, HaXml, etc) use the LGPL with an extra permissive clause which gets round the cross-module optimisation thing.
It's important to release your code as stable, tagged tarballs. Don't just rely on darcs for distribution.
- darcs dist generates tarballs directly from a darcs repository
$ cd fps $ ls Data LICENSE README Setup.hs TODO _darcs cbits dist fps.cabal tests $ darcs dist -d fps-0.8 Created dist as fps-0.8.tar.gz
You can now just post your fps-0.8.tar.gz
You can also have darcs do the equivalent of 'daily snapshots' for you by using a post-hook.
put the following in _darcs/prefs/defaults:
apply posthook darcs dist apply run-posthook
- Tag each release using darcs tag. For example:
$ darcs tag 0.8 Finished tagging patch 'TAG 0.8'
Then people can darcs pull --partial -t 0.8, to get just the tagged version (and not the entire history).
A Darcs repository can be published simply by making it available from a web page. If you don't have an account online, or prefer not to do this yourself, source can be hosted on darcs.haskell.org (you will need to email Simon Marlow to do this). haskell.org itself has some user accounts available.
There are also many free hosting places for open source, such as
Create a web page documenting your project! An easy way to do this is to add a project specific page to the Haskell wiki
Monad transformers are very useful for programming in the large, encapsulating state, and controlling side effects. To learn more about this approach, try Monad Transformers Step by Step.
The best code in the world is meaningless if nobody knows about it. The process to follow once you've tagged and released your code is:
Join the community
Announce your project on haskell@
Most important: announce your project releases to the firstname.lastname@example.org mailing list. Tag your email subject line with "ANNOUNCE: ...". This ensure it will then make it into the Haskell Weekly News. To be doubly sure, you can email the release text to the HWN editor.