# Lifting

Lifting is a concept which allows you to transform a function into a corresponding function within another (usually more general) setting.

## Lifting in general

We usually start with a (covariant) functor, for simplicity we will consider the Pair functor first. Haskell doesn't allow a `type Pair a = (a, a)`

to be a functor instance, so we define our own Pair type instead.

```
data Pair a = Pair a a deriving Show
instance Functor Pair where
fmap f (Pair x y) = Pair (f x) (f y)
```

If you look at the type of `fmap`

(`Functor f => (a -> b) -> (f a -> f b)`

), you will notice that `fmap`

already is a lifting operation: It transforms a function between simple types into a function between pairs of these types.

```
lift :: (a -> b) -> Pair a -> Pair b
lift = fmap
plus2 :: Pair Int -> Pair Int
plus2 = lift (+2)
-- plus2 (Pair 2 3) ---> Pair 4 5
```

Note, however, that not all functions between `Pair a`

and `Pair b`

can constructed as a lifted function (e.g. `\(x, _) -> (x, 0)`

can't).

A functor can only lift functions of exactly one variable, but we want to lift other functions, too:

```
lift0 :: a -> Pair a
lift0 x = Pair x x
lift2 :: (a -> b -> r) -> (Pair a -> Pair b -> Pair r)
lift2 f (Pair x1 x2) (Pair y1 y2) = Pair (f x1 y1) (f x2 y2)
plus :: Pair Int -> Pair Int -> Pair Int
plus = lift2 (+)
-- plus (Pair 1 2) (Pair 3 4) ---> Pair 4 6
```

In a similar way, we can define lifting operations for all containers that have "a fixed size", for example for the functions from `Double`

to any value `((->) Double)`

, which might be thought of as values that are varying over time (given as `Double`

). The function `\t -> if t < 2.0 then 0 else 2`

would then represent a value which switches at time 2.0 from 0 to 2. Using lifting, such functions can be manipulated in a very high-level way. In fact, this kind of lifting operation is already defined. `Control.Monad.Reader`

(see MonadReader) provides a `Functor`

, `Applicative`

, `Monad`

, `MonadFix`

and `MonadReader`

instance for the type `(->) r`

. The `liftM`

(see below) functions of this monad are precisely the lifting operations we are searching for.

If the containers don't have fixed size, it's not always clear how to make lifting operations for them. The `[]`

- type could be lifted using the `zipWith`

-family of functions or using `liftM`

from the list monad, for example.

## Applicative lifting

This should only provide a definition what lifting means (in the usual cases, not in the arrow case). It's not a suggestion for an implementation. I start with the (simplest?) basic operations `zipL`

, which combines to containers into a single one and `zeroL`

, which gives a standard container for ().

```
class Functor f => Liftable f where
zipL :: f a -> f b -> f (a, b)
zeroL :: f ()
liftL :: Liftable f => (a -> b) -> (f a -> f b)
liftL = fmap
liftL2 :: Liftable f => (a -> b -> c) -> (f a -> f b -> f c)
liftL2 f x y = fmap (uncurry f) $ zipL x y
liftL3 :: Liftable f => (a -> b -> c -> d) -> (f a -> f b -> f c -> f d)
liftL3 f x y z = fmap (uncurry . uncurry $ f) $ zipL (zipL x y) z
liftL0 :: Liftable f => a -> f a
liftL0 x = fmap (const x) zeroL
appL :: Liftable f => f (a -> b) -> f a -> f b
appL = liftL2 ($)
```

We need to postulate a few laws so that the definitions make sense. (Are they complete and/or minimal?)

```
assoc :: ((a, b), c) -> (a, (b, c))
assoc ~(~(x, y), z) = (x, (y, z))
{-
Identity:
fmap snd $ zipL zeroL x === x
fmap fst $ zipL x zeroL === x
Associativity:
fmap assoc $ zipL (zipL x y) $ z === zipL x $ zipL y z
-}
```

Today we have the `Applicative`

class that is equivalent to the `Liftable`

class.

```
pure = liftL0
(<*>) = appL
zeroL = pure ()
zipL = liftA2 (,)
```

In principle, `Applicative`

should be a superclass of `Monad`

, but chronologically `Functor`

and `Monad`

were before `Applicative`

.
Unfortunately, inserting `Applicative`

between `Functor`

and `Monad`

in the subclass hierarchy would break a lot of existing code and thus has not been done as of today (2011).

## Monad lifting

Lifting is often used together with monads. The members of the `liftM`

-family take a function and perform the corresponding computation within the monad.

```
return :: (Monad m) => a -> m a
liftM :: (Monad m) => (a1 -> r) -> m a1 -> m r
liftM2 :: (Monad m) => (a1 -> a2 -> r) -> m a1 -> m a2 -> m r
```

Consider for example the list monad (MonadList). It performs a nondeterministic calculation, returning all possible results. `liftM2`

just turns a deterministic function into a nondeterministic one:

```
plus :: [Int] -> [Int] -> [Int]
plus = liftM2 (+)
-- plus [1,2,3] [3,6,9] ---> [4,7,10, 5,8,11, 6,9,12]
-- plus [1..] [] ---> _|_ (i.e., keeps on calculating forever)
-- plus [] [1..] ---> []
```

Every `Monad`

can be made an instance of `Liftable`

using the following implementations:

```
{-# OPTIONS -fglasgow-exts #-}
{-# LANGUAGE AllowUndecidableInstances #-}
import Control.Monad
instance (Functor m, Monad m) => Liftable m where
zipL = liftM2 (\x y -> (x,y))
zeroL = return ()
```

Lifting becomes especially interesting when there are more levels you can lift between. `Control.Monad.Trans`

(see Monad transformers) defines a class

```
class MonadTrans t where
lift :: Monad m => m a -> t m a -- lifts a value from the inner monad m to the transformed monad t m
-- could be called lift0
```

lift takes the side effects of a monadic computation within the inner monad `m`

and lifts them into the transformed monad `t m`

. We can easily define functions which lift functions between inner monads to functions between transformed monads. Then we can perform three different lifting operations:
`liftM`

can be used both to transform a pure function into a function between inner monads and to a function between transformed monads, and finally lift transforms from the inner monad to the transformed monad. Because of the purity of Haskell, we can only lift "up".

## Arrow lifting

Until now, we have only considered lifting from functions to other functions. John Hughes' arrows (see Understanding arrows) are a generalization of computation that aren't functions anymore. An arrow `a b c`

stands for a computation which transforms values of type `b`

to values of type `c`

. The basic primitive `arr`

, aka `pure`

,

```
arr :: (Arrow a) => b -> c -> a b c
```

is also a lifting operation.