Xmonad/Config archive/vvv's Config.hs

-----------------------------------------------------------------------------
-- |
-- Module      :  Config.hs
-- Copyright   :  (c) Spencer Janssen 2007
-- License     :  BSD3-style (see LICENSE)
--
-- Maintainer  :  dons@galois.com
-- Stability   :  stable
-- Portability :  portable
--
-- This module specifies configurable defaults for xmonad. If you change
-- values here, be sure to recompile and restart (mod-q) xmonad,
-- for the changes to take effect.
--
------------------------------------------------------------------------

module Config where

--
-- Useful imports
--
import XMonad
import Operations
import qualified StackSet as W
import Data.Ratio
import Data.Bits ((.|.))
import qualified Data.Map as M
import System.Exit
import Graphics.X11.Xlib

-- % Extension-provided imports
import XMonadContrib.XPrompt
import XMonadContrib.ShellPrompt
import XMonadContrib.SshPrompt
import XMonadContrib.Submap
import XMonadContrib.CycleWS
import XMonadContrib.DynamicWorkspaces
import XMonadContrib.ManPrompt

-- | The default number of workspaces (virtual screens) and their names.
-- By default we use numeric strings, but any string may be used as a
-- workspace name. The number of workspaces is determined by the length
-- of this list.
--
-- A tagging example:
--
-- > workspaces = ["web", "irc", "code" ] ++ map show [4..9]
--
workspaces :: [WorkspaceId]
workspaces = map show [1..3 :: Int]

-- | modMask lets you specify which modkey you want to use. The default
-- is mod1Mask ("left alt").  You may also consider using mod3Mask
-- ("right alt"), which does not conflict with emacs keybindings. The
-- "windows key" is usually mod4Mask.
--
modMask :: KeyMask
modMask = mod4Mask

-- | The mask for the numlock key. Numlock status is "masked" from the
-- current modifier status, so the keybindings will work with numlock on or
-- off. You may need to change this on some systems.
--
-- You can find the numlock modifier by running "xmodmap" and looking for a
-- modifier with Num_Lock bound to it:
--
-- > $ xmodmap | grep Num
-- > mod2        Num_Lock (0x4d)
--
-- Set numlockMask = 0 if you don't have a numlock key, or want to treat
-- numlock status separately.
--
numlockMask :: KeyMask
numlockMask = mod2Mask

-- | Width of the window border in pixels.
--
borderWidth :: Dimension
borderWidth = 1

-- | Border colors for unfocused and focused windows, respectively.
--
normalBorderColor, focusedBorderColor :: String
normalBorderColor  = "#dddddd"
focusedBorderColor = "#ff0000"

-- | Default offset of drawable screen boundaries from each physical
-- screen. Anything non-zero here will leave a gap of that many pixels
-- on the given edge, on the that screen. A useful gap at top of screen
-- for a menu bar (e.g. 15)
--
-- An example, to set a top gap on monitor 1, and a gap on the bottom of
-- monitor 2, you'd use a list of geometries like so:
--
-- > defaultGaps = [(18,0,0,0),(0,18,0,0)] -- 2 gaps on 2 monitors
--
-- Fields are: top, bottom, left, right.
--
defaultGaps :: [(Int,Int,Int,Int)]
defaultGaps = [(0,15,0,0)] -- 15 for default dzen font

------------------------------------------------------------------------
-- Window rules

-- | Execute arbitrary actions and WindowSet manipulations when managing
-- a new window. You can use this to, for example, always float a
-- particular program, or have a client always appear on a particular
-- workspace.
--
manageHook :: Window -- ^ the new window to manage
           -> String -- ^ window title
           -> String -- ^ window resource name
           -> String -- ^ window resource class
           -> X (WindowSet -> WindowSet)

-- Always float various programs:
manageHook w _ _ c | c `elem` floats = fmap (W.float w . snd) (floatLocation w)
 where floats = ["MPlayer", "Gimp"]

-- Desktop panels and dock apps should be ignored by xmonad:
manageHook w _ n _ | n `elem` ignore = reveal w >> return (W.delete w)
 where ignore = ["gnome-panel", "desktop_window", "kicker", "kdesktop"]

-- Automatically send Firefox windows to the "web" workspace:
-- If a workspace named "web" doesn't exist, the window will appear on the
-- current workspace.
manageHook _ _ "Gecko" _ = return $ W.shift "web"

-- The default rule: return the WindowSet unmodified.  You typically do not
-- want to modify this line.
manageHook _ _ _ _ = return id

------------------------------------------------------------------------
-- Extensible layouts

-- | The list of possible layouts. Add your custom layouts to this list.
layouts :: [Layout Window]
layouts = [ Layout tiled
          , Layout $ Mirror tiled
          , Layout Full
          -- Add extra layouts you want to use here:
          -- % Extension-provided layouts
          ]
  where
     -- default tiling algorithm partitions the screen into two panes
     tiled   = Tall nmaster delta ratio

     -- The default number of windows in the master pane
     nmaster = 1

     -- Default proportion of screen occupied by master pane
     ratio   = 755%1024

     -- Percent of screen to increment by when resizing panes
     delta   = 2%100

-- | The top level layout switcher. Most users will not need to modify this binding.
--
-- By default, we simply switch between the layouts listed in `layouts'
-- above, but you may program your own selection behaviour here. Layout
-- transformers, for example, would be hooked in here.
--
layoutHook :: Layout Window
layoutHook = Layout $ Select layouts

-- | Register with xmonad a list of layouts whose state we can preserve over restarts.
-- There is typically no need to modify this list, the defaults are fine.
--
serialisedLayouts :: [Layout Window]
serialisedLayouts = layoutHook : layouts

------------------------------------------------------------------------
-- Logging

-- | Perform an arbitrary action on each internal state change or X event.
-- Examples include:
--      * do nothing
--      * log the state to stdout
--
-- See the 'DynamicLog' extension for examples.
--
logHook :: X ()
logHook = return ()

------------------------------------------------------------------------
-- Key bindings:

-- | The preferred terminal program, which is used in a binding below and by
-- certain contrib modules.
terminal :: String
terminal = "xterm"

-- | The xmonad key bindings. Add, modify or remove key bindings here.
--
-- (The comment formatting character is used when generating the manpage)
--
keys :: M.Map (KeyMask, KeySym) (X ())
keys = M.fromList $
    -- launching and killing programs
    [ ((mod1Mask, xK_F2), spawn terminal) -- %! Run a terminal emulator
    , ((modMask , xK_Delete), kill) -- %! Close the focused window
    , ((mod1Mask, xK_Down), spawn "amixer set Master 1-") -- %! Decrease audio volume
    , ((mod1Mask, xK_Up),   spawn "amixer set Master 1+") -- %! Increase audio volume
    , ((modMask .|. controlMask, xK_F11), spawn "xscreensaver-command -lock") -- %! Lock the screen

    , ((modMask,               xK_space ), sendMessage NextLayout) -- %! Rotate through the available layout algorithms
    , ((modMask .|. shiftMask, xK_space ), setLayout layoutHook) -- %!  Reset the layouts on the current workspace to default

    , ((modMask,               xK_n     ), refresh) -- %! Resize viewed windows to the correct size

    -- move focus up or down the window stack
    , ((modMask,               xK_Tab   ), windows W.focusDown) -- %! Move focus to the next window
    , ((modMask,               xK_j     ), windows W.focusDown) -- %! Move focus to the next window
    , ((modMask,               xK_k     ), windows W.focusUp  ) -- %! Move focus to the previous window
    , ((modMask,               xK_m     ), windows W.focusMaster  ) -- %! Move focus to the master window

    -- modifying the window order
    , ((modMask,               xK_Return), windows W.swapMaster) -- %! Swap the focused window and the master window
    , ((modMask .|. shiftMask, xK_j     ), windows W.swapDown  ) -- %! Swap the focused window with the next window
    , ((modMask .|. shiftMask, xK_k     ), windows W.swapUp    ) -- %! Swap the focused window with the previous window

    -- resizing the master/slave ratio
    , ((modMask,               xK_h     ), sendMessage Shrink) -- %! Shrink the master area
    , ((modMask,               xK_l     ), sendMessage Expand) -- %! Expand the master area

    -- floating layer support
    , ((modMask,               xK_t     ), withFocused $ windows . W.sink) -- %! Push window back into tiling

    -- increase or decrease number of windows in the master area
    , ((modMask              , xK_comma ), sendMessage (IncMasterN 1)) -- %! Increment the number of windows in the master area
    , ((modMask              , xK_period), sendMessage (IncMasterN (-1))) -- %! Deincrement the number of windows in the master area

    -- toggle the status bar gap
    , ((modMask              , xK_s     ), modifyGap (\i n -> let x = (defaultGaps ++ repeat (0,0,0,0)) !! i in if n == x then (0,0,0,0) else x)) -- %! Toggle the status bar gap

    -- quit, or restart
    , ((modMask .|. shiftMask, xK_q     ), io (exitWith ExitSuccess)) -- %! Quit xmonad
    , ((modMask              , xK_q     ), broadcastMessage ReleaseResources >> restart Nothing True) -- %! Restart xmonad

    -- % Extension-provided key bindings
    ]
   {--------------------------------------------------------------------
    ++
    -- mod-[1..9] %! Switch to workspace N
    -- mod-shift-[1..9] %! Move client to workspace N
    [((m .|. modMask, k), windows $ f i)
        | (i, k) <- zip workspaces [xK_1 .. xK_9]
        , (f, m) <- [(W.greedyView, 0), (W.shift, shiftMask)]]
    ++
    -- mod-{w,e,r} %! Switch to physical/Xinerama screens 1, 2, or 3
    -- mod-shift-{w,e,r} %! Move client to screen 1, 2, or 3
    [((m .|. modMask, key), screenWorkspace sc >>= flip whenJust (windows . f))
        | (key, sc) <- zip [xK_w, xK_e, xK_r] [0..]
        , (f, m) <- [(W.view, 0), (W.shift, shiftMask)]]
    -------------------------------------------------------------------}

    -- % Extension-provided key bindings lists
    ++
    [ ((mod1Mask, xK_F1), manPrompt   defaultXPConfig) -- %! Query for manual page to be displayed
    , ((mod1Mask, xK_F3), shellPrompt defaultXPConfig) -- %! Query for command line to execute
    , ((mod1Mask, xK_F4), sshPrompt   defaultXPConfig) -- %! Query for host to connect to with SSH

    , ((modMask, xK_i), submap . M.fromList $ -- mod-i submap
       [((m, k), f)
        | m <- [0, modMask]
        , (k, f) <- [ (xK_i, toggleWS) -- %! Toggle to the workspace displayed previously
                    , (xK_p, prevWS)   -- %! Switch to the previous workspace
                    , (xK_n, nextWS)   -- %! Switch to the next workspace
                    ]
       ]
       ++
       [ ((0, xK_apostrophe), selectWorkspace defaultXPConfig layoutHook) -- %! Prompt for a workspace number to switch to
       , ((shiftMask, xK_a), renameWorkspace defaultXPConfig) -- %! Allow the user to enter a name for the current workspace
       , ((0, xK_BackSpace), removeWorkspace) -- %! Destroy current workspace
       ]
       ++
       [((m, k), withNthWorkspace f i)
        | (i, k) <- zip [0..] [xK_1..xK_9]
        , (f, m) <- [ (W.greedyView, 0)       -- mod-i [1..9] %! Switch to workspace 1..9
                    , (W.greedyView, modMask) -- mod-i mod-[1..9] %! Switch to workspace 1..9
                    , (W.shift, shiftMask)    -- mod-i shift-[1..9] %! Move client to workspace 1..9
                    ]
       ]
      )
    ]

-- | Mouse bindings: default actions bound to mouse events
--
mouseBindings :: M.Map (KeyMask, Button) (Window -> X ())
mouseBindings = M.fromList $
    -- mod-button1 %! Set the window to floating mode and move by dragging
    [ ((modMask, button1), (\w -> focus w >> mouseMoveWindow w))
    -- mod-button2 %! Raise the window to the top of the stack
    , ((modMask, button2), (\w -> focus w >> windows W.swapMaster))
    -- mod-button3 %! Set the window to floating mode and resize by dragging
    , ((modMask, button3), (\w -> focus w >> mouseResizeWindow w))
    -- you may also bind events to the mouse scroll wheel (button4 and button5)

    -- % Extension-provided mouse bindings
    ]

-- % Extension-provided definitions