Difference between revisions of "Xmonad/Frequently asked questions"

From HaskellWiki
Jump to navigation Jump to search
m (→‎dzen status bars: s/xmonadand/xmonad/ in example code)
m (→‎I need to find the class title ....: add '| grep CLASS' to example)
Line 386: Line 386:
If you are using something like XMonad.Actions.WindowGo, or a hook, or some
If you are using something like XMonad.Actions.WindowGo, or a hook, or some
other feature like that where XMonad needs to know detailed information about a window, you can generally find what you need by splitting your screen between the window and a terminal; in the terminal, run <tt>xprop</tt>, and then click on the window. xprop will then print out quite a bit of useful information about the window.
other feature like that where XMonad needs to know detailed information about a window, you can generally find what you need by splitting your screen between the window and a terminal; in the terminal, run <tt>xprop | grep CLASS</tt> or the like, and then click on the window. xprop will then print out quite a bit of useful information about the window.
* '''resource''' is the first element in WM_CLASS(STRING)
* '''resource''' is the first element in WM_CLASS(STRING)
* '''class''' is the second element in WM_CLASS(STRING)
* '''class''' is the second element in WM_CLASS(STRING)

Revision as of 22:27, 21 January 2009



xmonad: frequently asked questions

For configuration tricks, and using xmonad.hs, see Xmonad/General_xmonad.hs_config_tips.

For more documentation, see:

When I start xmonad, nothing happens.

Don't panic, this is expected behavior. XMonad is a minimal window manager, meaning it doesn't set a background, start a status bar, display a splash screen or play a soothing sound effect when it starts up. Once xmonad has started, the only thing it does is listen for your first command. Try pressing mod-shift-enter (that is Alt, Shift, and Enter pressed at the same time) to bring up an xterm. Once the xterm appears, use it to read xmonad's man page or point a web browser at http://xmonad.org/tour.html. If no xterm appears, see if any other advice on this page applies.


What build dependencies does xmonad have?

The hackage page for xmonad lists all dependencies, including:

  • Standard Haskell libraries (you might already have these installed):
  • Haskell X11 bindings:
  • C libraries:
    • libX
    • libXext
    • libXinerama

You likely have these already if you've built any programs for X.

xmonad is also availble pre-packaged for many distributions:

Using your distro package is almost always preferred.

Can I install without root permission?

Yes, the Haskell libraries that xmonad depends on can all by installed in the user package database. Simply append --user to the install phase:

   $ runhaskell Setup.hs install --user

The library will be registered in your ~/.ghc/ database.

How can I use xmonad with a display manager? (xdm, kdm, gdm)

The simplest way is to create or modify your ~/.xsession file to run xmonad. If you don't already have a .xsession, the minimal example looks like:


This requires that the xmonad executable (or a symlink to it) is in a directory in your $PATH. Alternatively, you can use the full path to xmonad. People using 'startx' can use these example xinitrc and run-xmonad scripts.

If you are using xdm, you're done. Login and enjoy xmonad.

If you're using kdm or gdm (KDE and GNOME's display mangers, respectively), you're almost done. When logging in, select the entry that says "xsession" or "default session" from the menu in order to use your ~/.xsession to start xmonad.

Alternatively, if you want a menu entry specifically for xmonad, create a file named "xmonad.desktop" in your /usr/share/xsessions (location varies by distribution) directory. For example:

   [Desktop Entry]
   Comment=This session starts xmonad

Replace the "Exec=..." line with the actual path to your xmonad executable, and you should be able to login by selecting "xmonad" as a session from the menu in gdm/kdm.

For instructions on using gdm to launch a full GNOME session with xmonad as the window manager read this.

Compiling xmonad on PowerPC and compiler is not interactive

If you have ghc installed and are trying to compile xmonad and your compiler complains about not being interactive, never fear. To compile Setup.hs simply type:

   ghc --make Setup.hs -o Setup

Now you can:

   ./Setup configure
   ./Setup build
   sudo ./Setup install

If during the build process ghc complains about the "impossible happening", and mentions that you should change something to "-fvia-C", just edit the *.cabal file replacing the line that sets the arguments for ghc, changing "-fasm" to "-fvia-C".

How do I uninstall xmonad?

If you have installed xmonad using your package manager, then just use it. The following applies if you have built xmonad from source code (either darcs or stable release). Let's assume you've installed xmonad to

the $PREFIX (that is, gave --prefix=$PREFIX argument to Setup.lhs configure). If unsure, try your

$HOME and /usr/local as $PREFIX.

 rm  -f $PREFIX/bin/xmonad
 rm -rf $HOME/.xmonad
 rm -rf $PREFIX/lib/xmonad-$VERSION
 # If you have installed XMonadContrib:
 rm -rf $PREFIX/lib/xmonad-contrib-$VERSION

If you have installed xmonad 0.5 or newer, also run

 ghc-pkg unregister xmonad
 # If you have installed XMonadContrib:
 ghc-pkg unregister xmonad-contrib

Do not forget to purge that evil source code!


How do I configure xmonad?

By creating and editing the ~/.xmonad/xmonad.hs file, a Haskell source file.

You can use any Haskell you want in this module. The xmonad-contrib package contains many extension modules to make customizing xmonad easier. To have your changes take effect, save the xmonad.hs and either restart (mod-q) or exit X and log back in.

Example configurations are available on the wiki.

For extensive information on configuring, see the links at the top of this page, and the configuration tips page.

Rebinding the mod key (Alt conflicts with other apps; I want the ___ key!)

xmonad uses 'alt', actually mod1, as the default modifier. You may bind to other mod keys by editing your xmonad.hs modMask value, or by using xmodmap to rebind a key to mod1. The apple command key can be rebound to mod1 in this way. Use xmodmap to find what key your mod1 is bound to, as well.

You can rebind the Caps Lock key, to mod, if you wish. See this mailing list item.

If your new key binding doesn't appear to work, double check it doesn't clash with an existing binding.

An example, binding to the mod4 (often 'Win') key:

    import XMonad

    main = xmonad defaultConfig {
                modMask = mod4Mask
              , terminal = "urxvt"

I don't want the focus to follow the mouse

Easy. There is a setting focusFollowsMouse in the xmonad.hs file; set it to False and restart with mod+q.

How do I configure pointer-follows-focus?

In your config, import XMonad.Actions.Warp from Xmonad contrib and

add this function:

pointerFollowsFocus :: Rational -> Rational -> X ()
pointerFollowsFocus h v = do
    dpy <- asks display
    root <- asks theRoot
    withFocused $ \w -> do
        wa <- io $ getWindowAttributes dpy w
        (sameRoot,_,w',_,_,_,_,_) <- io $ queryPointer dpy root
        if (sameRoot && w == w') then
            return ()
            io $ warpPointer dpy none w 0 0 0 0
                (fraction h (wa_width wa)) (fraction v (wa_height wa))
          where fraction x y = floor (x * fromIntegral y)

Then set the logHook in your config to “pointerFollowsFocus x y”. If you already have a logHook, append “

>> pointerFollowsFocus x y” to it. For example:

myLogHook = dynamicLogWithPP defaultPP { ppCurrent = xmobarColor "#60ff45" ""
                                       , ppVisible = xmobarColor "#fffff0" "" } >> pointerFollowsFocus 1 1

Alternatively, if you are using the darcs release, you can use the already defined XMonad.Actions.UpdatePointer:

myLogHook = dynamicLogWithPP .... >> updatePointer

Does xmonad support a statusbar?

Yes. The Hooks.DynamicLog and Hooks.ManageDocks modules are your friends for this purpose.

Arbitrary external programs may be used as a statusbar. See for example dzen or xmobar, an extensible status bar.

xmonad lets you use any application as a 'statusbar', as long as it is visible in a given 'gap' on the screen, and has the override-redirect property set to true. Many status bar/dock programs already set this property, for example, dzen. To set other applications, you can sometimes use normal X resources. For example, to use xclock, launch it with

   xclock -digital -xrm '*overrideRedirect: True' -geometry 1024x30+0+0

And set a gap of (30,0,0,0) in Config.hs. A similar trick can be done for xsystray. Also in xmonad-darcs (will release as xmonad-0.9) see the Layout.Monitor module.

You can see screenshots of statusbars on the screenshots page.

You can also use Gnome or KDE trays and menus with xmonad. The Hooks.EwmhDesktops, Config.Desktop, Config.Gnome, Config.Kde, etc. modules make desktop environment status bars more useful with xmonad.

dzen status bars

xmonad's XMonadContrib library comes with a really easy function for getting a status bar working with dzen. To use it, simply have a ~/.xmonad/xmonad.hs containing:

    import XMonad
    import XMonad.Hooks.DynamicLog

    main = dzen xmonad

which will launch xmonad with dzen2 if found, set up with nice colours and workspace information. See Don's config example for more information or DynamicLog dzen's documentation.

There is an excellent command-line option and in-text command reference for the SVN version of dzen2 here

gkrellm or other monitors that aren't bars

Gkrellm does not behave like a dock by default. However, there is an option in .gkrellm2/user_config which says dock = 0. If you set it to 1 xmonad will recognize gkrellm as a dock.

Unfortunately gkrellm usually won't hide under other windows regardless of any combination of above and below options in said config file. Opening and closing the gkrellm config usually resolves this (right click the top of gkrellm and select Configure.. from the menu).

In xmonad-darcs (will release as xmonad-0.9) the Layout.Monitor module may be helpful.

Make space for a panel dock or tray

ManageDocks makes it possible for Xmonad to work with panels in the way they expect, automatically leaving the appropriate amount of room for them at the edges of the screen. ManageDocks has been enabled in the example configuration above. By itself, configuration looks like this:

import XMonad
import XMonad.Hooks.ManageDocks
main = xmonad defaultConfig
              { manageHook = manageDocks <+> manageHook defaultConfig
              , layoutHook = avoidStruts  $  layoutHook defaultConfig

Make new windows appear 'below' rather than 'above' the current window

Add doF W.swapDown to your manageHook. For instance, a minimal config would look like this:

import XMonad
import qualified XMonad.StackSet as W
main = xmonad defaultConfig
              { manageHook = (doF W.swapDown) <+> manageHook defaultConfig

Note: As of this writing, at least, this may result in windows popping up behind floating windows, and undesirable focus changes when starting and quickly destroying a window.

Avoid the master window, but otherwise manage new windows normally

-- <snip> 
import qualified XMonad.StackSet as W
-- <snip>

myManageHook = doF avoidMaster

-- or if you have other stuff in the managehook, more like
-- myManageHook = (otherStuff) <+> doF avoidMaster

avoidMaster :: W.StackSet i l a s sd -> W.StackSet i l a s sd
avoidMaster = W.modify' $ \c -> case c of
    W.Stack t [] (r:rs) -> W.Stack t [r] rs
    otherwise           -> c

Floating a window or sending it to a specific workspace by default

See General xmonad.hs config tips regarding manageHook, and the section here about 'xprop' for this.

Startup programs

You may launch programs at startup in the usual X manner: by adding them to your .xsession or .Xinitrc. For example, the following .xsession file launches xpmroot to set the background image, xmodmap to rebind caps lock to ctrl. It then launches a status bar program with dzen, before finally launching xmonad:

   # .xsession
   xpmroot ~/.bg/407511721_eb8559457c_o.xpm &
   xrdb -merge .Xresources
   xmodmap -e "remove Lock = Caps_Lock"
   xmodmap -e "keysym Caps_Lock = Control_L"
   xmodmap -e "add Control = Control_L"
   status | dzen2 -ta r -fg '#a8a3f7' \
                        -bg '#3f3c6d' \
                        -fn '-*-terminus-medium-r-normal--16-*' \
                        -e "button1=exec:xterm" & 
   urxvt &

You may also launch applications from your xmonad.hs, using startupHook.

Setting the X cursor

By default xmonad doesn't set a particular X cursor, which usually means the default X cursor will be used by the system. To set your own custom cursor, use the xsetroot program, as follows, from your startup file:

   xsetroot -cursor_name left_ptr

For example, to get nice left-pointing arrow head cursor.

Note that some display managers, such as "slim", don't unset the changes they make to the cursor when the window manager starts. This can be worked around by setting the cursor, as above.

Removing the borders around mplayer

You can also use the fullscreen layout, with the NoBorders smartBorders layout modifier, which automatically takes care of most cases.

To add 'smartBorders' to the default tiling modes:

    import XMonad
    import XMonad.Layout.NoBorders

    main = xmonad $ 
                { layoutHook = smartBorders $ layoutHook defaultConfig
                -- other fields like terminal, modMask, etc.

You can also remove borders with a key binding using Actions.NoBorders extension. There's drawback: you need manually remove border any time you launch mplayer.

Although this action should be able to be automated, unfortunately you cannot currently use manageHook for this purpose. That's because borders are drawn after runManageHook is executed (see Operations.hs for details).

Alternatively you can manually move the mplayer window 1 pixel to the left and one pixel up by importing XMonad.Actions.FloatKeys and adding a keybinding similar to ((modm, xK_b), withFocused (keysMoveWindow (-1,-1)). (I have not tested yet if this can be used in combination with the manageHook.)

I need to find the class title or some other X property of my program

If you are using something like XMonad.Actions.WindowGo, or a hook, or some other feature like that where XMonad needs to know detailed information about a window, you can generally find what you need by splitting your screen between the window and a terminal; in the terminal, run xprop | grep CLASS or the like, and then click on the window. xprop will then print out quite a bit of useful information about the window.

  • resource is the first element in WM_CLASS(STRING)
  • class is the second element in WM_CLASS(STRING)
  • title is WM_NAME(STRING)

(Applications may change the title after window creation, before xprop sees it. If possible, use resource or class in such cases.)

Sample output might look like:

_MOTIF_DRAG_RECEIVER_INFO(_MOTIF_DRAG_RECEIVER_INFO) = 0x6c, 0x0, 0x5, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0
XdndAware(ATOM) = BITMAP
                window state: Normal
                icon window: 0x0
                Client accepts input or input focus: True
                Initial state is Normal State.
                window id # of group leader: 0xf600001
_NET_WM_USER_TIME_WINDOW(WINDOW): window id # 0xf600013
WM_CLIENT_LEADER(WINDOW): window id # 0xf600001
                program specified minimum size: 32 by 34
                program specified resize increment: 8 by 17
                program specified base size: 16 by 0
                window gravity: NorthWest
WM_CLASS(STRING) = "emacs", "Emacs"
WM_ICON_NAME(STRING) = "emacs@craft"
_NET_WM_ICON_NAME(UTF8_STRING) = 0x45, 0x4d, 0x41, 0x43, 0x53
_NET_WM_NAME(UTF8_STRING) = 0x45, 0x4d, 0x41, 0x43, 0x53

Note: the last several lines contain useful information like the CLASS and hinting information.

What is the xK_ value for this key?

A complete list can be found at Xmonad/Key_codes.

How can I send a key sequence to a window?

This can be useful when some application uses a hotkey that you want to use in XMonad, yet be able to send the application window the hotkey when needed.

A solution is to use xdotool, which can (among other nifty things), send a fake keypress to the currently focused window. So, for instance, you can use the following keybinding to send Alt+L to the focused window by pressing Ctrl+Alt+L:

   , ((mod1Mask|controlMask, xK_l), spawn "xdotool key alt+l")

xdotool can also paste a line of ASCII text into the focused window. For instance, the following keybinding will insert the email address email@example.org each time the key Ctrl+Alt+e is pressed:

   , ((mod1Mask|controlMask, xK_e), spawn "xdotool text 'email@example.org'")

The XMonad.Util.Paste module (currently in the darcs repository only, will be in 0.9) defines functions to to the same with pure Haskell code.

I don't use a statusbar, but I'd like to have layout displayed for some time when it changes

Let's assume you have import qualified XMonad.StackSet as S in xmonad.hs.

Add the following declaration somewhere in the toplevel:

curLayout :: X String
curLayout = gets windowset >>= return . description . S.layout . S.workspace . S.current

Then add the keybinding:

   , ((mod1Mask, xK_a     ), sendMessage NextLayout >> (curLayout >>= \d->spawn $"xmessage "++d))

You might want to change xmessage to the more friendly program, such as osd_cat, qt-dialog or dzen2.

Another option is to use Layout.ShowWName which has some user configurable options such as font, color and fade timings.

More flexible way is to use dynamicLogString from XMonad.Hooks.DynamicLog (was added after 0.6 release), which

can also display current workspace, window name etc. and format them nicely.

How can I make xmonad use UTF8?

Due to extensions like DynamicLog, xmonad is capable of text

outputting which is not by default but can be encoded in UTF8. Therefore, if you want to output non-ASCII characters, you can take

advantage of the System.IO.UTF8 module.

For example using DynamicLog you can define it's output

ppOutput like this:

import qualified System.IO.UTF8

ppLog = defaultPP
  { ppOutput = \s -> do
      h <- openFile "/home/$USER/.xmonad/xmonad.log" WriteMode
      System.IO.UTF8.hPutStrLn h s
      hClose h

As it may not be ideal to reopen the file before every writing, you can just place the code somewhere else. See ray's config in xmonad's

config archive.

How do I use compositing with xmonad?

Xmonad has the ability to use some compositing features yet still be actually useable ;-). For example, some really nice transparency can be used with a composite aware app like urxvt and xcompmgr.

First enable compositing in your X server configuration by including the following in your xorg.conf

Section "Extensions"
     Option "Composite" "enable"

restart the X server and confirm it's working with xdpyinfo | grep Composite. If it returns Composite, then good...

Include this in ~/.Xdefaults

URxvt.depth: 32
URxvt*background: rgba:0000/0000/0000/cccc

this specifies that urxvt uses 32 bit colors and uses a transparent black background. The four c's specify the amount of alpha with ffff being full black and 0000 being fully transparent. You can also use the fading and blurRadius resources to give some nice effects in the transparency. see man urxvt.

finally you need to fire up xcompgr so that this will all actually work. probably you'll want to include it in your ~/.xinitrc or ~/.xsession file:

xcompmgr -c &

the -c option provides a soft shadow around your windows. There are many options, see man xcompmgr.

For an example with screenshots see andrewsw's config in the config archive.

On newer versions of XMonad, see also XMonad.Hooks.FadeInactive documentation.


xmonad does not detect my multi-head setup

If you've installed xmonad via Debian or Ubuntu packages, note that the current version of libghc6-x11-dev was not built with Xinerama support. You'll have to build the Haskell X11, xmonad, and xmonad-contrib packages from source until this issue is resolved.

If you've built from source, you may not have the Xinerama development files installed. Install them, then watch the configure output for X11. Look for the following lines:

   checking X11/extensions/Xinerama.h usability... yes
   checking X11/extensions/Xinerama.h presence... yes
   checking for X11/extensions/Xinerama.h... yes

Be sure to clean and rebuild xmonad after building and installing X11.

The following ghci commands can help investigate your Xinerama setup.

   :m + Graphics.X11.Xinerama Graphics.X11.Xlib.Display
   openDisplay "" >>= getScreenInfo

compiledWithXinerama should give a Bool result, and getScreenInfo a list of screen Rectangles. Xlib error messages point to xorg configuration problems. Please check xorg.logs.

Though this is the kind of fix that shouldn't work, it nearly always does: If compiledWithXinerama returns True, try:

   runhaskell Setup.lhs clean
   runhaskell Setup.lhs configure --user --prefix=$HOME
   runhaskell Setup.lhs build
   runhaskell Setup.lhs install --user

for xmonad, and xmonad-contrib if you use it. Since xmonad 0.5, it is also sometimes necessary to

   xmonad --recompile

before you restart xmonad, so that the xmonad binary gets linked against the new X11 library.

Missing X11 headers

Your build will fail if you've not installed the X11 C library headers at some point. ./configure for the Haskell X11 library will fail. To install the X11 C libs:

  • debian
   apt-get install libx11-dev

X11 fails to find libX11 or libXinerama

Cabal has difficulty locating library directories on some platforms (such as the Mac or RHEL4). First, locate the directory that contains libX11.so (libX11.dylib on Mac OS X). Add the following line to the .cabal file for the package:

   extra-lib-dirs: /your/path/here/

For example, on a 64 bit machine you might need to add:

   extra-lib-dirs: /usr/X11R6/lib/lib64

You can also add the paths to your .buildinfo file, or set the LD_LIBRARY_PATH environment variable.

defaultGaps doesn't work any more! (just upgraded to >0.7)

See Make space for a panel section

Showing fractions of lines in gvim, urxvt,etc.

This is due to certain layouts doesn't care about so called size hints (resize increments) specifically the WM_NORMAL_HINTS(WM_SIZE_HINTS) (use xprop to see it). This, combined with certain programs, like gvim, which doesn't check if it gets enough size to render the last line and uses it anyway render this annoying behaviour. Aside from patching the offending program, you can:

  1. Use a layout which uses these size hints like Hinted Grid, or HintedTile
  2. Use the layoutHints modifier on any layout
  3. Workaround in .vimrc. These lines in your .vimrc lets you change the number of lines with F4/Shift-F4:
  map <F4> :let &lines=&lines-1^M
  map <S-F4> :let &lines=&lines+1^M

The ^M is created with Ctrl-V Ctrl-M.

Losing text when resizing xterms

Being a dynamic tiling window manager, xmonad, like ion or dwm, makes heavy use of resizing. Clients such as xterm, might not take well to resizing and the window might require a refresh (Ctrl-L). To minimize this, several users recommend urxvt (rxvt-unicode), which handles resizing much better.

I just resized my terminal, but the terminal app didn't resize.

This is a SIGWINCH bug in the Linux kernel, believe it or not, starting in 2.6.26. Details here: http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/8044876def45c0b0/4b7f4cd87feafe5e?show_docid=4b7f4cd87feafe5e.

The simplest solution is to up/downgrade to a kernel version without this bug.

However, there is a pending patch in the linux-next branch here: http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=3e0301ea47644782e0c0432b66fffd9da86323cc. It should be included in a near-future version of the kernel.

Changes to the config file ignored or 'xmonad not found' when starting X

Both ghc and xmonad must be in your $PATH for reconfiguration to work, and init's $PATH when starting X and xmonad. Make sure the environment from which you start xmonad has the appropriate settings.

When changing the xmonad.hs and restarting with mod-q, xmonad will attempt to exec the xmonad binary. This means it must be in your $PATH environment variable, or the exec will fail silently and the old xmonad instance keeps running.

With xmonad 0.5 and later, mod-q will also call ghc on your ~/.xmonad/xmonad.hs file, and will continue with defaults if ghc is not found.

Additionally, if you change and reinstall the haskell-X11 or XMonadContrib library, changes to that package will not be noticed by xmonad's recompilation checker, so xmonad.hs won't be recompiled. (needs confirmation: is this true?) To fix this:

   xmonad --recompile

after reinstalling the contrib library.

Dynamic restart doesn't work

The dynamic reconfigure and restart feature (mod-q) assumes that xmonad is in your $PATH environment. If it isn't, restarting will have no effect.

XMonad is frozen!

XMonad stops but the current window still responds to keys

Usually this is because a dynamicLog is writing to a pipe handle that's not being read. For example the xmonad.hs uses spawnPipe to run a status bar and writes to it in the logHook, but the status bar is not installed, not in $PATH, or not set up to read its stdin. If you don't want xmonad info in the status bar, edit the logHook appropriately.

With xmobar, if your logHook is writing to its stdin, make sure the commands include a Run StdinReader line, and the template includes %StdinReader%.

XMonad stops responding to keys (usually due to unclutter)

The number one cause for this is the 'unclutter' program, which can fool some clients into thinking they've lost the pointer, when in fact they have not. See the '-noevents' flag to unclutter.

Use the XMonad.Actions.Warp contrib module instead.

An app seems to have frozen and xmonad stops responding to keys

Often you can get X to behave again by running 'xclock -display :0' on the appropriate display via ssh or from a virtual terminal.

There is also an option in xorg.conf which enables the key combination Ctrl+Alt+Keypad-Divide to break active keyboard and mouse grabs.

This may allow xmonad to continue normally in such cases. To enable this key combination, add the following line to your xorg.conf in the

Section Server Flags then restart X:

Option "AllowDeactivateGrabs" "on"

Problems with Java applications, Applet java console

The Java gui toolkit has a hardcoded list of so-called "non-reparenting" window managers. xmonad is not on this list (nor are many of the newer window managers). Attempts to run Java applications may result in `grey blobs' where windows should be, as the Java gui code gets confused.

The cleanest way is to lie to Java about what window manager you are, by using the SetWMName extension to pretend to be "LG3D". Note that modules using Hooks.EwmhDesktops, such as Config.Gnome, etc. currently setWMName to "xmonad" and prevent this method from working.

Another option is to use an AWT toolkit without this problem by setting:


This seems to fix:

  • cgoban3
  • Netbeans

It also fixes an issue with Java gui applications where menus are not "selectable". Clicking on the menu item opens the dropdown list of options but you can't select one.

  • Using the free blackdown java runtime also seems to work correctly.
  • Using JDK 7 also seems to work, Anthony Brown writes:

    I just downloaded and early binary release of JDK 7 and it looks like the new Java version behaves properly ... I tried using some Gui apps that gave me the infamous grey windows with Java6 (or Java5 without setting AWT_TOOLKIT=MToolkit) and so far no problems occured.

XMonad doesn't save my layouts and windows

xmonad will remember your workspace layouts during dynamic restart (mod-q), but not when quitting X altogether. Note that this means if you add or remove layouts to the config.hs file, the changes won't be noticed during a hot-restart (the state from the previous session will be used).

You can reinitialise the xmonad state dynamically with mod-shift-space.

Some keys not working

If you've an unusual keyboard, X may not know precisely which keys you've bound xmonad actions to. An example is when you've use a French keyboard. You may need to set your own mod key, or use different key bindings in Config.hs. See this thread for advice on rebinding keys. Also, for binding to media keys, Benjamin A’Lee has written a great step by step guide to binding non-standard keys in xmonad.

Firefox's annoying popup downloader

Some applications, notably Firefox 1 and 2, create tranisent windows not set with the transient property. (e.g. firefox's download manager). When these windows appear, they can take focus and be annoying. For the case of firefox, the 'Download Statusbar' extension is useful for disabling this annoying UI feature.

Copy and Paste on the Mac

When using X11 for Mac OS X, and you switch from the quartz WM to xmonad, you can lose copy/paste functionality between X windows and normal Mac apps. To fix this, and restore copy and paste, add

 quartz-wm --only-proxy &

in your .xinitrc above the line that runs xmonad. It will capture and syncronize copy/paste events in both environments. More specifically, it mirrors OS X copy actions into both PRIMARY and CLIPBOARD, but only CLIPBOARD into OS X paste.

OpenOffice looks bad

OpenOffice won't use (strangely) the GTK look, unless the following environment variable is set:


Use this if you don't like the default look of OpenOffice in xmonad.

Help! xmonad just segfaulted

Due to this bug in GHC's recompilation checker,


if you updated a previously built xmonad, or XMonadContrib, when a depedent library has changed in the meantime, GHC will happilly go ahead and link your libraries together, into a broken binary. This will at best produce a linker error, and at worst, a version of xmonad that will segfault.

The rule is: when rebuilding, for example, XMonadContrib, always clean first if any library it depends on has changed.

   runhaskell Setup.lhs clean

You may also want to make sure your config gets rebuilt:

   xmonad --recompile

Cabal: Executable stanza starting with field 'flag small_base description'

When using ghc 6.6, or old versions of Cabal, you may get errors when configuring:

   *** Exception: getSection got a line without a '{'.  Consider this a bug.

These are all symptoms of trying to compile xmonad with an old version of cabal.

The darcs version after xmonad 0.4 switched to requiring Cabal 1.2 to build xmonad. You must have Cabal 1.2 or newer to build xmonad older than 0.4. It will work fine with ghc 6.6.1, and you do not need to updated ghc. This will also not break older packages. Get cabal from Hackage:


Build and install as usual, then rebuild xmonad.

To build Cabal with ghc 6.6.1 you will also need the filepath library, which is also (of course) available from hackage: