Difference between revisions of "Yi"
|Line 56:||Line 56:|
* Yi is now hosted on code.haskell.org/yi
* Yi is now hosted on code.haskell.org/yi
* Further simplify build process
* Further simplify build process
* Simplify creation of keybindings; More powerful combinators.
* Tons of fixes
* Support for templates
* Syntax hilight modes for Cabal & C++
* GHC 6.8 support (and Yi is ever easier to build)
* word completion infrastructure
* vim: more window commands implemented
* Very important architectural cleanups (07:07, 15 July 2007 (UTC)):
** Buffer implementation is purely functional
** IO monad is only found at the toplevel (buffer-only and editor-only actions do not rely on IO)
** Window management is frontend independent
** Factored indent-code across keymaps
** All dependency cycles removed (makes for an easier understanding of the code)
* C-code removed from Yi
* Dynamic selection of frontend
* Cleaned up the multiple package mess
* Console buffer (old news)
* Common buffer backend (across all frontends) (15:08, 2 June 2007 (UTC))
* Overlays (thanks Ben Moseley)
* per-buffer extensible state (11:44, 28 May 2007 (UTC))
* Synchronous keymaps: the behaviour of the keymap (ie. the underlying parser) can depend on the editor state.
* Full-dynamic Yi
** it's now possible to change any part of the Yi codebase and see the result with a mere 'M-x reconfigE' (take that, Steve Yegge :))
* Yi is now hosted on darcs.haskell.org/yi
* Dired mode (thanks Ben Moseley)
* Yi 0.2 released!
* Buffer-specific code is now contained in BufferM monad
* Multiple marks per buffer
* All keymaps use a unified mechanism! (and are therefore potentially composable)
* Miniwindows for vty frontend
* Miniwindows for GTK frontend
* Basic support for query-replace (emacs)
* Rudimentary support for indentation
* Syntax highlighting in GTK frontend
* Completion for file names
* Incremental search (emacs)
* Completion for M-x, and buffer switch.
* History for emacs mode minibuffer
* New commands and keybindings can be defined easily and dynamically
* Yi is an haskell interpreter!
** Possibility to run editor actions interactively (similar to emacs M-x)
** Configuration is just a haskell module exporting (yiMain :: Action)
* Possibility to evaluate haskell expressions interactively.
* New, unified way to define Keybindings
* Vty frontend supports Haskell (lexical) syntax highlighting (thanks Stefan O'Rear)
* GTK frontend works in Win32
* GTK frontend (in addition of Vty frontend) (requires gtk>=0.9.10.4)
* Linewrap support
* Bugfixes in scrolling
* Lots of simplifications in the cursor management
* Keymaps can now process typed events instead of Chars (no extra decode step)
* Yi.Debug added for debugging
* Vty frontend replaces Curses frontend
== Bugs ==
== Bugs ==
Revision as of 09:02, 24 February 2008
- 1 About
- 2 Get Yi
- 3 Screenshots (0.3)
- 4 NEWS
- 5 Bugs
- 6 FAQs
- 6.1 Installation
- 6.2 Default key bindings
- 6.2.1 CUA key bindings
- 6.2.2 Vim key bindings
- 6.2.3 Emacs key bindings
- 6.3 Development
- 6.4 Configuration
- 6.5 Usage
- 7 Contribute
- 8 Yi ideas
Yi is a text editor written and extensible in Haskell. The goal of Yi is to provide a flexible, powerful and correct editor core dynamically scriptable in Haskell.
- Yi is an haskell interpreter. Very much like emacs is a Lisp interpreter, this makes really easy to dynamically hack, experiment and modify Yi. All tools and goodies written in haskell are also readily available from the editor. This is implemented by binding to the GHC api.
- Frontends. Yi can use either gtk2hs or vty as frontends, so users can choose their favourite interface.
- "Emulation modes". The primary emulation modes for Yi are vim and emacs. Keybindings for vi, mg and nano and other are also provided. Other editor interfaces can be written by the user to extend Yi.
The long term goal of the project is to make Yi the editor of choice for the haskell hacker.
The main short term goal is to maximize Yi's Fun Factor. This includes:
- improve hackability (and therefore architecture)
- add cool features
former Yi homepage: http://www.cse.unsw.edu.au/~dons/yi.html
Stable release on Hackage:
- (NOTE: the 0.2 release does not work with recent versions of GHC/libraries, and is not supported at all. Please use the darcs repo version instead.)
darcs get --partial http://code.haskell.org/yi/
We try to keep the repository in a clean and buildable state, so it's "testable". If you have Darcs installed and a GHC 6.8.x installation, this is a better choice.
(Recent items first)
- Buffer modes
- Context-free (ie. non-regular) syntax highlighters
- Fast (incremental) syntax highlighters
- XMonad-stlye, static configuration (fast load!)
- More Vim emulation
- Many bugfixes
- Yi 0.3 released
- 'sdist' functionality
- Haddocked API
- Reverse incremental search
- "rope-like" structure for buffer (eg. for reading/editing huge log files)
- Experimental Cocoa frontend (OS X)
- More functionality of emacs/vim implemented
- Andy wrote a nice Yi tutorial: http://nobugs.org/developer/yi/index.html
- Yi is now hosted on code.haskell.org/yi
- Further simplify build process
Check/report bug reports here: Google Code: yi-editor
- How do I install Yi?
- Get it from Hackage. Configure, compile and install Yi as you would do for any other Cabal package. See also above-mentioned (2.3 Platform Support).
- Setup configure fails with
Setup.hs: Package yi-0.4 can't be built on this system.
- It means that you have no UI package available. You need VTY or GTK2hs installed. Get them from Hackage.
- cabal install yi fails with dependency errors, e.g.:
$ cabal install yi Resolving dependencies... cabal.exe: dependencies conflict: ghc-6.8.3 requires bytestring ==0.9.0.1.1 however bytestring-0.9.0.1.1 was excluded because bytestring-0.9.0.1 was selected instead bytestring-0.9.0.1.1 was excluded because yi-0.3 requires bytestring =0.9.0.1
- Try removing all your old yi packages, and do
before attempting to install.
- cabal install -fghcAPI fails
- If you want GHC API special capabilities, you have to download, configure, build and copy separately:
cd yi cabal configure -fghcAPI cabal build cabal copy
- Compilation fails with a message about alex not being available?
- Currently, Cabal doesn't track programs, just libraries, so it won't warn you if you are missing Alex (as many people are). The solution here is to just cabal install alex first. (Yi uses Alex to generate code for parsing stuff with syntax, like Haskell source.)
- I can't install yi-gtk or yi-vty! It wants sourceview or something.
- As the Hackage descriptions say, yi-gtk and yi-vty are only for versions of older than Yi 0.3. You really should be running the latest development (GitHub) or stable (Hackage) versions of Yi, so don't try to install these two packages. Yi supports VTY and Gtk2hs directly in the yi package now.
- On Mac OS X if you get an error message similar to this:
yi: can't load .so/.DLL for: gthread-2.0 (dlopen(libgthread-2.0.dylib, 10): image not found)
- then your dynamic library search path variable is probably not set correctly. You can set it (in Bash) using:
- (Adjust the specific path to your system. You can find the right location using locate libgthread)
- On Mac OS 10.6 (Snow Leopard) if you get the following error:
Loading package cairo-0.11.1 ... <command line>: can't load .so/.DLL for: pixman-1 (dlopen(/opt/local/lib/libpixman-1.dylib, 9): no suitable image found. Did find: /opt/local/lib/libpixman-1.dylib: mach-o, but wrong architecture) cabal: Error: some packages failed to install: yi-0.6.2.4 failed during the building phase. The exception was: ExitFailure 1
- then the problem is that GHC currently only supports linking against i386 libraries, and your ports are compiled for x86_64. To fix, recompile your ports with the +universal variant like so:
port install installed +universal
- Compilation fails with errors about template-haskell or data-accessor:
Add constraints about which release of those libraries to use.
$ cabal install yi --constraint="data-accessor < 0.2.1" --constraint="template-haskell < 2.4"
Default key bindings
CUA key bindings
|Ctrl-s||Save the current file.|
|Ctrl-q||Quit the editor.|
|→||Move cursor forward one character.|
|←||Move cursor back one character.|
|↓||Move cursor down one line.|
|↑||Move cursor down one line.|
|Shift+→||Extend selection forward one character.|
|Shift+←||Extend selection back one character.|
|Shift+↓||Extend selection down one line.|
|Shift+↑||Extend selection up one line.|
|Ctrl-→||Move cursor forward one word.|
|Ctrl-←||Move cursor back one word.|
|Home||Move cursor to beginning of line.|
|End||Move cursor to end of line.|
|Ctrl-Home||Move cursor to beginning of document.|
|Ctrl-End||Move cursor to end of document.|
|Ctrl-x||Cut the selected area and save it to the clipboard|
|Ctrl-c||Copy the selected area to the clipboard|
|Ctrl-v||Paste contents of clipboard at cursor.|
|Ctrl-z||Undo last operation.|
|Ctrl-y||Redo last operation.|
Vim key bindings
Emacs key bindings
C = Control
M = Meta = Alt|Esc
|C-x C-f||"Find" file i.e. open/create a file in buffer|
|C-x C-s||Save the file|
|C-x C-w||Write the text to an alternate name|
|C-x i||Insert file at cursor position|
|C-x b||Create/switch buffers|
|C-x C-b||Show buffer list|
|C-x k||Kill buffer|
|C-x C-c||Close down Yi|
|M-f||Forward one word|
|M-b||Backward one word|
|C-a||Beginning of line|
|C-e||End of line|
|C-v||One page up|
|M-v||Scroll down one page|
|M-<||Beginning of text|
|M->||End of text|
|M-n||Repeat the following command n times|
|C-u||Repeat the following command 4 times|
|C-d||Delete a char|
|M-Del||Delete word backwards|
|C-Space||Set beginning mark (for region marking for example)|
|C-W||"Kill" (delete) the marked region region|
|M-W||Copy the marked region|
|C-y||"Yank" (paste) the copied/killed region/line|
|M-y||Yank earlier text (cycle through kill buffer)|
|C-x C-x||Exchange cursor and mark|
|C-t||Transpose two chars|
|M-t||Transpose two words|
|M-u||Make letters uppercase in word from cursor position to end|
|M-c||Simply make first letter in word uppercase|
|M-l||Opposite to M-u|
|C-g||Quit the running/entered command|
|C-x u||Undo previous action|
|M-/||Undo previous action|
|Space or y||Replace this occurrence|
|Del or n||Don't replace|
|!||Replace all following occurrences|
|ENTER or q||Quit replace|
|C-x 2||Split window vertically|
|C-x o||Change to other window|
|C-x 0||Delete window|
|C-x 1||Close all windows except the one the cursors in|
DIRectory EDitor (dired)
|C-x d||Start up dired|
|C (large C)||Copy|
|d||Mark for erase|
|D||Delete right away|
|e or f||Open file or directory|
|g||Re-read directory structure from file|
|m||Mark with *|
|n||Move to next line|
|x||Delete files marked with D|
|M-m||Move to first (non-space) char in this line|
|M-^||Attach this line to previous|
|M-;||Formatize and indent comment|
|M-a||Beginning of statement|
|M-e||End of statement|
|C-c C-c||Comment out marked area|
- How do I install Yi for development?
- Fork the repository on GitHub, then clone your version to your machine. Push to your repo on GitHub, and then make merge requests.
- What are some of the dependancies?
- There is a rather long list of dependencies for Yi, check the yi.cabal file for a list.
- If you are on Mac OS X and are using MacPorts, then these will not be included in the GHC in that distribution. Many of the dependancies are in MacPorts (for example: ghc, ghc-devel, alex, and gtk2hs). However, you may have some trouble building with Cabal-1.5.2, since it is a development version of Cabal. To work around these issues, you might have to add the line "Build-Type: Simple" to the .cabal files in the above required packages.
How to Configure Yi
You can find some example configs at https://github.com/yi-editor/yi/tree/master/example-configs
A good way to start is to copy yi.hs in your $XDG_CONFIG_HOME/yi directory (create it if needed, usually ~/.config/yi), and hack as needed.
GError on startup
I get the error message "yi.exe: <<System.Glib.GError.GError>>" when I try to run yi.
Sometimes this is a result of yi not being able to find the contents of the art directory when trying to start in graphical mode (e.g. Gtk or Pango). Check that the install has be done correctly or use the VTY mode ($ yi -f vty).
For more detail on the error, modify main in Yi/Main.hs to catch GError:
Right finalCfg -> do catchGError (do when (debugMode finalCfg) $ initDebug ".yi.dbg" startEditor finalCfg state) (\(GError dom code msg) -> fail msg)
Note that more recent versions of Yi (e.g. from the GitHub repo) no longer simply display the anonymous GError but instead provide a more detailed error message (making the above code snippet unnecessary).
Get the repo here:
darcs get --partial http://code.haskell.org/yi/
Work on whatever you please, patches are always welcome. :)
Otherwise, see the complete list of open issues here: http://code.google.com/p/yi-editor/issues/list
(Note you can start working on all issues in New/Accepted state, regardless of the owner of the issue. -- you can send an email to the list with your plan if unsure)
Post your questions and follow up on the mailing list: http://groups.google.com/group/yi-devel
Some other pending tasks are described below.
Write access policy
One does not need write access to the repository to contribute. Use "darcs send" to send your patches to the Yi development mailing list; someone else can apply them.
Write access can however be granted, with the following disclaimer:
- All people with write access can apply patches without prior approval. If one thinks a patch would be controversial, it might be a good idea to discuss it on the list though.
- Try to not break the build. (By Murphy's law, if you do so it will happen at the most annoying moment...) So, always try to build before pushing patches. Bypassing Darcs's test build to record a patch indicates you should further improve your patch.
- I can at any time rollback a patch for whatever reason. This however should not upset the author of the patch. Most contributions are welcome, so a patch revert normally would only mean that a detail or two need to be worked out. (eg. it breaks an important feature in some configuration, etc.)
This section is meant to gather ideas people have for Yi.
Coming from an Emacs background, I think a few things are essential, mainly the introspection capabilities of Emacs.
The following are things I like about Emacs, as an extensible environment, and miss in Yi:
- Really good online documentation
- Emacs can tell you a lot about a function or variable with a keypress--- the current value, where it is declared, and a hypertext formation string
- All (good) apps allow users to extend, through, e.g., hooks --- a list of functions that are run before/after some event (like saving a file)
So, why replace it?:
- Dynamically scoped, Dynamically typed, ugly, old. 'Nuff said
- What's a Parser?
- A lot of apps in emacs do stuff with text, usually text that is in some language. There is no standard parser (like, e.g. parsec), so a lot of it is ugly handwritten spaghetti. This also means that adding analysis tools isn't really done (or done nicely).
- ELisp again
- Haskell is a lot cleaner to write, especially because of the large number of libraries.
(See also WhyDoesElispSuck on the Emacs wiki.)
Emacs maybeness (?)
Some things that are sometimes bad, sometimes good:
- Everything is a buffer
- Makes some sense, but sometimes doesn't. It is nice to have uniform key bindings do the right thing (e.g., C-Space sets the mark, and the region can then be used, e.g. to delete a sequence of emails in Wl) Sometimes, however, you just want some sort of GUI widget.
- OTOH, having the minibuffer be a special kind of buffer is a good idea.
- It is possible to associate arbitrary properties with symbols. This means you can annotate a symbol and then use that information at a later date
- good things
- modal key editing
- light weight - fast startup
Take some ideas from emacs, some from vi, but don't stick them all together without a single core philosophy. Otherwise, you'll end up with an editor that looks like it was thrown together. Some people come from an emacs background, some from vi, some from elsewhere, and ALL of them will want yi to behave like their regular editor. The best way to do this is to have a single person make all the decisions on behaviour.
- An extension to GHCi to support documentation of symbols.
- This seems to be (reasonably) straightforward, as GHCi already has :info. It would mean hacking the type environment (what about values?) to add documentation information. The main problem would seem to be populating this --- maybe hack haddock to produce something from the library docs? I assume that using package GHC uses the parent RTS (package GHC seems to be the way to go, but more investigation is required --- don?)
- Views on data
- Rather than just editing a file, you would open a view onto the file, i.e. there is no longer a 1-1 correspondence between buffers and files. Why? Well, for aggregate buffers (i.e., editing multiple files in the one view), or for multiple views of a file (e.g. AST and source-level). There would be some primitive ops for editing a buffer (insertChar, delete, etc.), which would then call update functions on anything observing that file.
- Remote attach so I can work from home, but still use a remote machine
- Like Emacs's server?
- Haddock documentation
- (no brainer), maybe associate with .hi files for binaries.
- Maybe a class
YiShow, which all config items must be a member of? This is to emulate describe-variable
- Support for collaborative editing. This would be very good for #haskell work, and the text editor Gobby and its Obby protocol seem to provide a candidate way of doing things.
- Interface to the runtime
- The scheduler, docs, etc.
- Introspection of e.g. what processes are running.
- There are already libraries in Haskell for processes, but they don't give Yi any extra information --- we really want a layer on top.
Sjw 09:15, 2 June 2006 (UTC)