# 99 questions/54A to 60

### From HaskellWiki

This is part of Ninety-Nine Haskell Problems, based on Ninety-Nine Prolog Problems.

If you want to work on one of these, put your name in the block so we know someone's working on it. Then, change n in your block to the appropriate problem number, and fill in the <Problem description>,<example in lisp>,<example in Haskell>,<solution in haskell> and <description of implementation> fields.

## 1 Binary trees

A binary tree is either empty or it is composed of a root element and two successors, which are binary trees themselves.

## 2 Problem 54A

(*) Check whether a given term represents a binary tree

In Prolog or Lisp, one writes a predicate to do this.

Example in Lisp:

* (istree (a (b nil nil) nil)) T * (istree (a (b nil nil))) NIL

In Haskell, we characterize binary trees with a datatype definition:

data Tree a = Empty | Branch a (Tree a) (Tree a) deriving (Show, Eq)

The above tree is represented as:

tree1 = Branch 'a (Branch 'b' (Branch 'd' Empty Empty) (Branch 'e' Empty Empty)) (Branch 'c' Empty (Branch 'f' (Branch 'g' Empty Empty) Empty)))

Other examples of binary trees:

tree2 = Branch 'a' Empty Empty -- a binary tree consisting of a root node only tree3 = nil -- an empty binary tree tree4 = Branch 1 (Branch 2 Empty (Branch 4 Empty Empty)) (Branch 2 Empty Empty)

are binary trees: it is just not possible to construct an invalid tree with this type. Hence, it is redundant to introduce a predicate to

check this property: it would always return## 3 Problem 55

(**) Construct completely balanced binary trees

In a completely balanced binary tree, the following property holds for every node: The number of nodes in its left subtree and the number of nodes in its right subtree are almost equal, which means their difference is not greater than one.

Write a function cbal-tree to construct completely balanced binary trees for a given number of nodes. The predicate should generate all solutions via backtracking. Put the letter 'x' as information into all nodes of the tree.

Example:

* cbal-tree(4,T). T = t(x, t(x, nil, nil), t(x, nil, t(x, nil, nil))) ; T = t(x, t(x, nil, nil), t(x, t(x, nil, nil), nil)) ; etc......No

Example in Haskell:

*Main> cbalTree 4 [Branch 'x' (Branch 'x' Empty Empty) (Branch 'x' Empty (Branch 'x' Empty Empty)),Branch 'x' (Branch 'x' Empty Empty) (Branch 'x' (Branch 'x' Empty Empty) Empty),Branch 'x' (Branch 'x' Empty (Branch 'x' Empty Empty)) (Branch 'x' Empty Empty),Branch 'x' (Branch 'x' (Branch 'x' Empty Empty) Empty) (Branch 'x' Empty Empty)]

Solution:

cbalTree 0 = [Empty] cbalTree n = [Branch 'x' l r | i <- [q .. q + r], l <- cbalTree i, r <- cbalTree (n - i - 1)] where (q, r) = quotRem (n-1) 2

Here we use the list monad to enumerate all the trees, in a style that is more natural than standard backtracking.

## 4 Problem 56

(**) Symmetric binary trees

Let us call a binary tree symmetric if you can draw a vertical line through the root node and then the right subtree is the mirror image of the left subtree. Write a predicate symmetric/1 to check whether a given binary tree is symmetric. Hint: Write a predicate mirror/2 first to check whether one tree is the mirror image of another. We are only interested in the structure, not in the contents of the nodes.

Example in Haskell:

*Main> symmetric (Branch 'x' (Branch 'x' Empty Empty) Empty) False *Main> symmetric (Branch 'x' (Branch 'x' Empty Empty) (Branch 'x' Empty Empty)) True

Solution:

mirror Empty Empty = True mirror (Branch _ a b) (Branch _ x y) = mirror a y && mirror b x mirror _ _ = False symmetric Empty = True symmetric (Branch _ l r) = mirror l r

## 5 Problem 57

(**) Binary search trees (dictionaries)

Use the predicate add/3, developed in chapter 4 of the course, to write a predicate to construct a binary search tree from a list of integer numbers.

Example:

* construct([3,2,5,7,1],T). T = t(3, t(2, t(1, nil, nil), nil), t(5, nil, t(7, nil, nil)))

Then use this predicate to test the solution of the problem P56.

Example:

* test-symmetric([5,3,18,1,4,12,21]). Yes * test-symmetric([3,2,5,7,1]). No

Example in Haskell:

*Main> construct [3, 2, 5, 7, 1] Branch 3 (Branch 2 (Branch 1 Empty Empty) Empty) (Branch 5 Empty (Branch 7 Empty Empty)) *Main> symmetric . construct $ [5, 3, 18, 1, 4, 12, 21] True *Main> symmetric . construct $ [3, 2, 5, 7, 1] True

Solution:

add :: Ord a => a -> Tree a -> Tree a add x Empty = Branch x Empty Empty add x t@(Branch y l r) = case compare x y of LT -> Branch y (add x l) r GT -> Branch y l (add x r) EQ -> t construct xs = foldl (flip add) Empty xs

Here, the definition of construct is trivial, because the pattern of accumulating from the left is captured by the standard function foldl.

## 6 Problem 58

(**) Generate-and-test paradigm

Apply the generate-and-test paradigm to construct all symmetric, completely balanced binary trees with a given number of nodes.

Example:

* sym-cbal-trees(5,Ts). Ts = [t(x, t(x, nil, t(x, nil, nil)), t(x, t(x, nil, nil), nil)), t(x, t(x, t(x, nil, nil), nil), t(x, nil, t(x, nil, nil)))]

Example in Haskell:

*Main> symCbalTrees 5 [Branch 'x' (Branch 'x' Empty (Branch 'x' Empty Empty)) (Branch 'x' (Branch 'x' Empty Empty) Empty),Branch 'x' (Branch 'x' (Branch 'x' Empty Empty) Empty) (Branch 'x' Empty (Branch 'x' Empty Empty))]

Solution:

symCbalTrees = filter symmetric . cbalTree

## 7 Problem 59

(**) Construct height-balanced binary trees

In a height-balanced binary tree, the following property holds for every node: The height of its left subtree and the height of its right subtree are almost equal, which means their difference is not greater than one.

Example:

?- hbal_tree(3,T). T = t(x, t(x, t(x, nil, nil), t(x, nil, nil)), t(x, t(x, nil, nil), t(x, nil, nil))) ; T = t(x, t(x, t(x, nil, nil), t(x, nil, nil)), t(x, t(x, nil, nil), nil)) ; etc......No

Example in Haskell:

*Main> take 4 $ hbalTree 'x' 3 [Branch 'x' (Branch 'x' Empty Empty) (Branch 'x' Empty (Branch 'x' Empty Empty)), Branch 'x' (Branch 'x' Empty Empty) (Branch 'x' (Branch 'x' Empty Empty) Empty), Branch 'x' (Branch 'x' Empty Empty) (Branch 'x' (Branch 'x' Empty Empty) (Branch 'x' Empty Empty)), Branch 'x' (Branch 'x' Empty (Branch 'x' Empty Empty)) (Branch 'x' Empty Empty)]

Solution:

hbalTree x = map fst . hbalTree' where hbalTree' 0 = [(Empty, 0)] hbalTree' 1 = [(Branch x Empty Empty, 1)] hbalTree' n = let t = hbalTree' (n-2) ++ hbalTree' (n-1) in [(Branch x lb rb, h) | (lb,lh) <- t, (rb,rh) <- t , let h = 1 + max lh rh, h == n]

Alternative solution:

hbaltree :: a -> Int -> [Tree a] hbaltree x 0 = [Empty] hbaltree x 1 = [Branch x Empty Empty] hbaltree x h = [Branch x l r | (hl, hr) <- [(h-2, h-1), (h-1, h-1), (h-1, h-2)], l <- hbaltree x hl, r <- hbaltree x hr]

If we want to avoid recomputing lists of trees (at the cost of extra space), we can use a similar structure to the common method for computation of all the Fibonacci numbers:

hbaltree :: a -> Int -> [Tree a] hbaltree x h = trees !! h where trees = [Empty] : [Branch x Empty Empty] : zipWith combine (tail trees) trees combine ts shortts = [Branch x l r | (ls, rs) <- [(shortts, ts), (ts, ts), (ts, shortts)], l <- ls, r <- rs]

## 8 Problem 60

(**) Construct height-balanced binary trees with a given number of nodes Consider a height-balanced binary tree of height H. What is the maximum number of nodes it can contain? Clearly, MaxN = 2**H - 1. However, what is the minimum number MinN? This question is more difficult.

Try to find a recursive statement and turn it into a functionOn the other hand, we might ask: what is the maximum height H a height-balanced binary tree with N nodes can have?

Write a functionNow, we can attack the main problem: construct all the height-balanced binary trees with a given nuber of nodes.

Find out how many height-balanced trees exist for N = 15.

Example in Prolog:

?- count_hbal_trees(15,C). C = 1553

Example in Haskell:

*Main> length $ hbalTreeNodes 'x' 15 1553 *Main> map (hbalTreeNodes 'x') [0,1,2,3] [[Empty], [Branch 'x' Empty Empty], [Branch 'x' Empty (Branch 'x' Empty Empty),Branch 'x' (Branch 'x' Empty Empty) Empty], [Branch 'x' (Branch 'x' Empty Empty) (Branch 'x' Empty Empty)]]

Solution:

hbalTreeNodes _ 0 = [Empty] hbalTreeNodes x n = concatMap toFilteredTrees [minHeight .. maxHeight] where toFilteredTrees = filter ((n ==) . countNodes) . hbalTree x -- Similar to the Fibonacci sequence but adds 1 in each step. minNodesSeq = 0:1:zipWith ((+).(1+)) minNodesSeq (tail minNodesSeq) minNodes = (minNodesSeq !!) minHeight = ceiling $ logBase 2 $ fromIntegral (n+1) maxHeight = (fromJust $ findIndex (>n) minNodesSeq) - 1 countNodes Empty = 0 countNodes (Branch _ l r) = countNodes l + countNodes r + 1

Another solution generates only the trees we want:

-- maximum number of nodes in a weight-balanced tree of height h maxNodes :: Int -> Int maxNodes h = 2^h - 1 -- minimum height of a weight-balanced tree of n nodes minHeight :: Int -> Int minHeight n = ceiling $ logBase 2 $ fromIntegral (n+1) -- minimum number of nodes in a weight-balanced tree of height h minNodes :: Int -> Int minNodes h = fibs !! (h+2) - 1 -- maximum height of a weight-balanced tree of n nodes maxHeight :: Int -> Int maxHeight n = length (takeWhile (<= n+1) fibs) - 3 -- Fibonacci numbers fibs :: [Int] fibs = 0 : 1 : zipWith (+) fibs (tail fibs) hbalTreeNodes :: a -> Int -> [Tree a] hbalTreeNodes x n = [t | h <- [minHeight n .. maxHeight n], t <- baltree h n] where -- baltree h n = weight-balanced trees of height h with n nodes -- assuming minNodes h <= n <= maxNodes h baltree 0 n = [Empty] baltree 1 n = [Branch x Empty Empty] baltree h n = [Branch x l r | (hl,hr) <- [(h-2,h-1), (h-1,h-1), (h-1,h-2)], let min_nl = max (minNodes hl) (n - 1 - maxNodes hr), let max_nl = min (maxNodes hl) (n - 1 - minNodes hr), nl <- [min_nl .. max_nl], let nr = n - 1 - nl, l <- baltree hl nl, r <- baltree hr nr]