Personal tools

Haskell programming tips

From HaskellWiki

(Difference between revisions)
Jump to: navigation, search
m (Forget about quot and rem: Formatting)
(Don't overuse lambdas: Updated the link to the Data.Ord documentation)
Line 211: Line 211:
which is both clearer and re-usable.
which is both clearer and re-usable.
Actually, starting with GHC-6.6 you do not need to define <hask>comparing</hask>, since it is already in module <hask>Data.Ord</hask>.
Actually, starting with GHC-6.6 you do not need to define <hask>comparing</hask>, since it is already in module <hask>Data.Ord</hask>.
(Just a remark for this special example:
(Just a remark for this special example:
Line 233: Line 233:
                 putStrLn $ shows lineNr $ showString ": " $ show line
                 putStrLn $ shows lineNr $ showString ": " $ show line
===<hask>Bool</hask> is a regular type===
===<hask>Bool</hask> is a regular type===

Revision as of 21:58, 24 May 2011


1 Preface

This page shows several examples of how code can be improved. We try to derive general rules from them, though they cannot be applied deterministically and are a matter of taste. We all know this, please don't add "this is disputable" to each item!

Instead, you can now add "this is disputable" on /Discussion and change this page only when some sort of consensus is reached.

2 Be concise

2.1 Don't reinvent the wheel

The standard libraries are full of useful, well-tuned functions. If you rewrite an existing library function, the reader of your code might spend a minute trying to figure out why you've done that. But if you use a standard function, the reader is likely to either immediately understand what you've done, or can learn something new.

2.2 Avoid explicit recursion

Explicit recursion is not generally bad, but you should spend some time trying to find a more declarative implementation using higher order functions.

Don't define

raise :: Num a => a -> [a] -> [a]
raise _ [] = []
raise x (y:ys) = x+y : raise x ys

because it is hard for the reader to find out how much of the list is processed and on which values the elements of the output list depend. Just write

raise x ys = map (x+) ys

or even

raise x = map (x+)

and the reader knows that the complete list is processed and that each output element depends only on the corresponding input element.

If you don't find appropriate functions in the standard library, extract a general function. This helps you and others understand the program. Thanks to higher order functions Haskell gives you very much opportunities to factor out parts of the code. If you find the function very general, put it in a separate module and re-use it. It may appear in the standard libraries later, or you may later find that it is already there in an even more general way.

Decomposing a problem this way also has the advantage that you can debug more easily. If the last implementation of
does not show the expected behaviour, you can inspect
(I hope it is correct :-) ) and the invoked instance of

This is a special case of the general principle of separating concerns. If you can write the loop over a data structure once and debug it, then there's no need to duplicate that code.

Another example:

The function
counts the number of elements

which fulfill a certain property,

i.e. the elements for which the predicate

I found the following code (but convoluted in a more specific function) in a Haskell program

count :: (a -> Bool) -> [a] -> Int
count _ [] = 0
count p (x:xs)
   | p x       = 1 + count p xs
   | otherwise =     count p xs

which you won't like after you become aware of

count p = length . filter p


2.3 Only introduce identifiers you need

Here is some advice that is useful for every language, including scientific prose ( Introduce only identifiers you use. The compiler will check this for you if you pass an option like -Wall to GHC.

In an expression like

[a | i <- [1..m]]
might be a horrible complex expression it is not easy to see, that
really does not depend on
replicate m a

is certainly better here.

2.4 Remember the zero

Don't forget that zero is a natural number. Recursive definitions become more complicated if the recursion anchor is not chosen properly. For example the function
presented in DMV-Mitteilungen 2004/12-3, Jürgen Bokowski: Haskell, ein gutes Werkzeug der Diskreten Mathematik (Haskell, a good tool for discrete mathematics). This is also a good example of how to avoid guards.
tuples :: Int -> [a] -> [[a]]
tuples r l
   | r == 1        = [[el] | el <- l]
   | length l == r = [l]
   | otherwise     = (map ([head l] ++) (tuples (r-1) (tail l)))
                                    ++   tuples  r    (tail l)

Do you have an idea what it does?

Let's strip the guards and forget about list comprehension.

tuples :: Int -> [a] -> [[a]]
tuples 1 l = map (:[]) l
tuples r l =
  if r == length l
    then [l]
      let t = tail l
      in  map (head l :) (tuples (r-1) t)
                     ++   tuples  r    t

What about tuples with zero elements? We can add the pattern

tuples 0 _ = [[]]

but then we can also omit the pattern for 1-tuples.

tuples :: Int -> [a] -> [[a]]
tuples 0 _ = [[]]
tuples r l =
  if r == length l
    then [l]
      let t = tail l
      in  map (head l :) (tuples (r-1) t)
                     ++   tuples  r    t
What about the case
r > length l
? Sure, no reason to let
fail - in that case there is no tuple, thus we return an empty list. Again, this saves us one special case.
tuples :: Int -> [a] -> [[a]]
tuples 0 _ = [[]]
tuples r l =
  if r > length l
    then []
      let t = tail l
      in  map (head l :) (tuples (r-1) t)
                     ++   tuples  r    t
We have learnt above that
is evil! What about
tuples :: Int -> [a] -> [[a]]
tuples 0 _  = [[]]
tuples _ [] = []
tuples r (x:xs) =
   map (x :) (tuples (r-1) xs)
         ++   tuples  r    xs
? It is no longer necessary to compute the length of
again and again. The code is easier to read and it covers all special cases, including
tuples (-1) [1,2,3]
! Eliminating the
test can worsen performance dramatically in some cases, like
tuples 24 [1..25]
. We could also use
null (drop (r-1) l)
instead of
length l < r
, which works for infinite lists. See also below.

You can even save one direction of recursion

by explicit computation of the list of all suffixes provided by

You can do this with do notation

tuples :: Int -> [a] -> [[a]]
tuples 0 _  = [[]]
tuples r xs = do
  y:ys <- tails xs
  map (y:) (tuples (r-1) ys)
in the list monad is
, we can also write this as follows. Where in the previous version the pattern
filtered out the last empty suffix we have to do this manually now with
tuples :: Int -> [a] -> [[a]]
tuples 0 _  = [[]]
tuples r xs =
   concatMap (\(y:ys) -> map (y:) (tuples (r-1) ys))
             (init (tails xs))
The list of all suffixes could be generated with
iterate tail

but this ends with a "Prelude.tail: empty list".

generates the suffixes in the same order but aborts properly.

More generally, Base cases and identities

2.5 Don't overuse lambdas

Like explicit recursion, using explicit lambdas isn't a universally bad idea, but a better solution often exists. For example, Haskell is quite good at currying. Don't write

zipWith (\x y -> f x y)
map (\x -> x + 42)

instead, write

zipWith f
map (+42)

also, instead of writing

-- sort a list of strings case insensitively
sortBy (\x y -> compare (map toLower x) (map toLower y))


comparing p x y = compare (p x) (p y)
sortBy (comparing (map toLower))

which is both clearer and re-usable.

Actually, starting with GHC-6.6 you do not need to define
, since it is already in module

(Just a remark for this special example: We can avoid multiple evaluations of the conversions with a function that is present in GHC.Exts of GHC 6.10:

sortWith :: (Ord b) => (a -> b) -> [a] -> [a]
sortWith f x = map snd (sortBy (comparing fst) (zip (map f x) x))


As a rule of thumb, once your expression becomes too long to easily be point-freed, it probably deserves a name anyway. Lambdas are occasionally appropriate however, e.g. for control structures in monadic code (in this example, a control-structure "foreach2" which most languages don't even support.):

foreach2 xs ys f = zipWithM_ f xs ys
linify :: [String] -> IO ()
linify lines
        = foreach2 [1..] lines $ \lineNr line -> do
            unless (null line) $
                putStrLn $ shows lineNr $ showString ": " $ show line

is a regular type

Logic expressions are not restricted to guards and

Avoid verbosity like in

isEven n
  | mod n 2 == 0  =  True
  | otherwise     =  False

since it is the same as

isEven n  =  mod n 2 == 0


The definitions

hasSpace (a:as)
  | isSpace a = True
  | otherwise = hasSpace as


hasSpace (a:as) = if isSpace a then True else hasSpace as

can be shortened to

hasSpace (a:as) = isSpace a || hasSpace as

(I just wanted to show the logic transform.

In the particular example you would write
any isSpace
, of course.)

The same way

allPrintable (a:as)
  | isSpace a = False
  | otherwise = allPrintable as


allPrintable (a:as) = if isSpace a then False else allPrintable as

can be shortened to

allPrintable (a:as) = not (isSpace a) && allPrintable as
all (not . isSpace)
is even better in this particular example.)

3 Use syntactic sugar wisely

People who employ syntactic sugar extensively argue that it makes their code more readable. The following sections show several examples where less syntactic sugar is more readable.

It is argued that a special notation is often more intuitive than a purely functional expression. But the term "intuitive notation" is always a matter of habit. You can also develop an intuition for analytic expressions that don't match your habits at the first glance. So why not making a habit of less sugar sometimes?

3.1 List comprehension

List comprehension lets you remain in imperative thinking, that is it lets you think in variables rather than transformations. Open your mind, discover the flavour of the pointfree style!

Instead of

[toUpper c | c <- s]


map toUpper s



[toUpper c | s <- strings, c <- s]

where it takes some time for the reader to discover which value depends on what other value and it is not so clear how many times

the interim values
are used.

In contrast to that

map toUpper (concat strings)

can't be clearer.

When using higher order functions you can switch more easily from
to other data structures.


map (1+) list


mapSet (1+) set


If there were a standard instance for the

you could use the code

fmap (1+) pool

for both choices.

If you are not used to higher order functions for list processing you may feel you need parallel list comprehension. This is unfortunately supported by GHC now,

but it is arguably superfluous since various flavours of
already do a great job.


do notation is useful to express the imperative nature (e.g. a hidden state or an order of execution) of a piece of code.

Nevertheless it's sometimes useful to remember that the
notation is explained in terms of functions.

Instead of

  text <- readFile "foo"
  writeFile "bar" text

one can write

readFile "foo" >>= writeFile "bar"


The code

  text <- readFile "foo"
  return text

can be simplified to

readFile "foo"

by a law that each Monad must fulfill.

You certainly also agree that

  text <- readFile "foobar"
  return (lines text)

is more complicated than

liftM lines (readFile "foobar")


By the way, the
class method
and the
based function
are the same (as long as both are defined, as they should be). Be aware that "more complicated" does not imply "worse". If your do-expression was longer than this, then mixing do-notation and
might be precisely the wrong thing to do, because it adds one more thing to think about. Be natural. Only change it if you gain something by changing it. -- AndrewBromage

3.3 Guards

Disclaimer: This section is NOT advising you to avoid guards. It is advising you to prefer pattern matching to guards when both are appropriate. -- AndrewBromage

Guards look like

-- Bad implementation:
fac :: Integer -> Integer
fac n | n == 0 = 1
      | n /= 0 = n * fac (n-1)

which implements a factorial function. This example, like a lot of uses of guards, has a number of problems.

The first problem is that it's nearly impossible for the compiler to check whether guards like this are exhaustive, as the guard conditions may be arbitrarily complex (GHC will warn you if you use the -Wall option). To avoid this problem and potential bugs through non exhaustive patterns you should use an
guard, that will match for all remaining cases:
-- Slightly improved implementation:
fac :: Integer -> Integer
fac n | n == 0    = 1
      | otherwise = n * fac (n-1)
Another reason to prefer this one is its greater readability for humans and optimizability for compilers. Though it may not matter much in a simple case like this, when seeing an
it's immediately clear that it's used whenever the previous guard fails, which isn't true if the "negation of the previous test" is spelled out. The same applies to the compiler: It probably will be able to optimize an
(which is a synonym for
) away but cannot do that for most expressions. This can be done with even less sugar using
-- Less sugar (though the verbosity of if-then-else can also be considered as sugar :-)
fac :: Integer -> Integer
fac n = if n == 0
          then 1
          else n * fac (n-1)
Note that
has its own set of problems, for example in connection with the layout rule or that nested
s are difficult to read. See Case how to avoid nested

But in this special case, the same can be done even more easily with pattern matching:

-- Good implementation:
fac :: Integer -> Integer
fac 0 = 1
fac n = n * fac (n-1)

Actually, in this case there is an even more easier to read version, which (see above) doesn't use Explicit Recursion:

-- Excellent implementation:
fac :: Integer -> Integer
fac n = product [1..n]
This may also be more efficient as
might be optimized by the library-writer... In GHC, when compiling with optimizations turned on, this version runs in O(1) stack-space, whereas the previous versions run in O(n) stack-space.

Note however, that there is a difference between this version and the previous ones: When given a negative number, the previous versions do not terminate (until StackOverflow-time), while the last implementation returns 1.

Guards don't always make code clearer. Compare

foo xs | not (null xs) = bar (head xs)


foo (x:_) = bar x

or compare the following example using the advanced pattern guards

parseCmd ln
   | Left err <- parse cmd "Commands" ln
     = BadCmd $ unwords $ lines $ show err
   | Right x <- parse cmd "Commands" ln
     = x

with this one with no pattern guards:

parseCmd ln = case parse cmd "Commands" ln of
   Left err -> BadCmd $ unwords $ lines $ show err
   Right x  -> x
or, if you expect your readers to be familiar with the
parseCmd :: -- add an explicit type signature, as this is now a pattern binding
parseCmd = either (BadCmd . unwords . lines . show) id . parse cmd "Commands"

Incidentally, compilers often also have problems with numerical patterns. For example, the pattern
in fact means
fromInteger 0
; thus it involves a computation, which is uncommon for function parameter patterns. To illustrate this, consider the following example:
data Foo = Foo deriving (Eq, Show)
instance Num Foo where
    fromInteger = error "forget it"
f       :: Foo -> Bool
f 42    = True
f _     = False
*Main> f 42
*** Exception: forget it

Only use guards when you need to. In general, you should stick to pattern matching whenever possible.


In order to allow pattern matching against numerical types, Haskell 98 provides so-called n+k patterns, as in

take :: Int -> [a] -> [a]
take (n+1) (x:xs) = x: take n xs
take _     _      = []

However, they are often criticized for hiding computational complexity and producing ambiguities, see /Discussion for details. They are subsumed by the more general Views proposal, which has unfortunately never been implemented despite being around for quite some time now.

4 Efficiency and infinity

A rule of thumb is: If a function makes sense for an infinite data structure but the implementation at hand fails for an infinite amount of data, then the implementation is probably also inefficient for finite data.

4.1 Don't ask for the length of a list when you don't need it

Don't write

length x == 0
to find out if the list
is empty. If you write it, you force Haskell to create all list nodes. It fails on an infinite list although the expression should be evaluated to
in this case. (Nevertheless the content of the list elements may not be evaluated.)

In contrast

x == []
is faster but it requires the list
to be of type
is a type of class

The best thing to do is

null x
Additionally, many uses of the length function are overspecifying the problem: one may only need to check that a list is at least a certain length, and not a specific length. Thus use of
could be replaced with an
function that only checks to see that a list is greater than the required minimum length.
atLeast :: Int -> [a] -> Bool
atLeast 0 _      = True
atLeast _ []     = False
atLeast n (_:ys) = atLeast (n-1) ys
or non-recursive, but less efficient because both
must count
atLeast :: Int -> [a] -> Bool
atLeast n x = n == length (take n x)

or non-recursive but fairly efficient

atLeast :: Int -> [a] -> Bool
atLeast n =
  if n>0
    then not . null . drop (n-1)
    else const True


atLeast :: Int -> [a] -> Bool
atLeast 0 = const True
atLeast n = not . null . drop (n-1)

The same problem arises if you want to shorten a list to the length of another one by

take (length x) y
since this is inefficient for large lists
and fails for infinite ones. But this can be useful to extract a finite prefix from an infinite list.

So, instead

zipWith const y x

works well.

It should be noted that
can be replaced by

which allow the usage of Peano numbers.

4.2 Don't ask for the minimum when you don't need it

The function
checks if a number is a lower limit to a sequence.
isLowerLimit :: Ord a => a -> [a] -> Bool
isLowerLimit x ys = x <= minimum ys
It certainly fails if
is infinite. Is this a problem?

Compare it with

isLowerLimit x = all (x<=)
This definition terminates for infinite lists, if
is not a lower limit. It aborts immediately if an element is found which is below
. Thus it is also faster for finite lists. Even more: It also works for empty lists.

4.3 Use sharing

If you want a list of lists with increasing length and constant content, don't write

map (flip replicate x) [0..]

because this needs quadratic space and run-time. If you code

iterate (x:) []

then the lists will share their suffixes and thus need only linear space and run-time for creation.

4.4 Choose the appropriate fold

See "Stack overflow" or "Foldr Foldl Foldl'" for advice on which fold is appropriate for your situation.

5 Choose types properly

5.1 Lists are not good for everything

5.1.1 Lists are not arrays

Lists are not arrays, so don't treat them as such.

Frequent use of
should alarm you. Accessing the
th list element involves traversing through the first
nodes of the list.

This is very inefficient.

If you access the elements progressively, as in

[x !! i - i | i <- [0..n]]

you should try to get rid of indexing, as in

zipWith (-) x [0..n]


If you really need random access, as in the Fourier Transform, you should switch to Arrays.

5.1.2 Lists are not sets

If you manage data sets where each object can occur only once and the order is irrelevant, if you use list functions like


frequently, you should think about switching to sets. If you need multi-sets, i.e. data sets with irrelevant order but multiple occurrences of objects,

you can use a
Data.Map.Map a Int

5.1.3 Lists are not finite maps

Similarly, lists are not finite maps, as mentioned in efficiency hints.

5.2 Reduce type class constraints

5.2.1 Eq type class

When using functions like
, and so on you should be aware that they need types of the
class. There are two problems: The routines might not work as expected if a processed list contains multiple equal elements and the element type of the list may not be comparable, like functions.


The following function takes the input list
and removes each element of
once from

Clear what it does? No? The code is probably more understandable

removeEach :: (Eq a) => [a] -> [[a]]
removeEach xs = map (flip List.delete xs) xs

but it should be replaced by

removeEach :: [a] -> [[a]]
removeEach xs =
   zipWith (++) (List.inits xs) (tail (List.tails xs))
since this works perfectly for function types
and for equal elements in

5.3 Don't use
when you don't consider integers

Before using integers for each and everything (C style) think of more specialised types.

If only the values
are of interest, try the type

If there are more but predefined choices and numeric operations aren't needed try an enumeration.

Instead of

type Weekday = Int


data Weekday = Monday
             | Tuesday
             | Wednesday
             | Thursday
             | Friday
             | Saturday
             | Sunday
  deriving (Eq, Ord, Enum)
It allows all sensible operations like
and forbids all nonsensical ones like

You cannot accidentally mix up weekdays with numbers and the signature of a function with weekday parameter clearly states what kind of data is expected.

If an enumeration is not appropriate

you can define a
carrying the type that is closest to what you need.

E.g. if you want to associate objects with a unique identifier,

you may want to choose the type
. But you don't need arithmetic and you can make this type distinct from real
s by defining
newtype Identifier = Identifier Int deriving Eq

5.4 Avoid redundancy in data types

I often see data types with redundant fields, e.g.

data XML =
     Element Position Name [Attribute] [XML]
   | Comment Position String
   | Text Position String
I suggest to factor out the common field

since this lets you handle the text position the same way for all XML parts.

data XML = XML Position Part
data Part =
     Element Name [Attribute] [XML]
   | Comment String
   | Text String

6 Miscellaneous

6.1 Separate IO and data processing

It's not good to use the IO Monad everywhere, much of the data processing can be done without IO interaction. You should separate data processing and IO because pure data processing can be done purely functionally, that is you don't have to specify an order of execution and you don't have to worry about what computations are actually necessary. Useful techniques are described in Avoiding IO.

6.2 Forget about quot and rem

They complicate handling of negative dividends.
are almost always the better choice. If
b > 0
then it always holds
a == b * div a b + mod a b
mod a b < b
mod a b >= 0
The first equation is true also for
, but the two others are true only for
, but not for
. That is,
mod a b
always wraps
to an element from
, whereas the sign of
rem a b
depends on the sign of
. This seems to be more an issue of experience rather than one of a superior reason. You might argue, that the sign of the dividend is more important for you, than that of the divisor. However, I have never seen such an application, but many uses of
were clearly superior.


  • Conversion from a continuously counted tone pitch to the pitch class, like C, D, E etc.:
    mod p 12
  • Pad a list
    to a multiple of
    number of elements:
    xs ++ replicate (mod (- length xs) m) pad
  • Conversion from a day counter to a week day:
    mod n 7
  • Pacman runs out of the screen and re-appears at the opposite border:
    mod x screenWidth


6.3 Partial functions like

Avoid functions that fail for certain input values like

They raise errors that can only be detected at runtime. Think about how they can be avoided by different program organization or by choosing more specific types.

Instead of

if i == Nothing then deflt else fromJust i


fromMaybe deflt i
Please note, that
also requires an
class instance for the type of
, which
does not require because it employs pattern matching.

See also #Reduce type class constraints.

If it is not possible to avoid
this way, then use
anyway and document with an
why you think that the value must be always
in your situation.
fromMaybe (error "Function bla: The list does always contains the searched value")
          (lookup key dict)
The function
can be avoided by checking with types, that it is never empty. There is also a function which returns an existing first list element in terms of

(See remark.)

7 Related Links

7.1 Common Mistakes and Incorrect Beliefs By Haskell Beginners

7.2 Some Common (and not so common!) Hugs Errors